Festo Pneumatic Cylinder 32mm Bore, 30mm Stroke, ADN Series, Double Acting

  • RS Stock No. 121-5750
  • Mfr. Part No. ADN-32-30-I-P-A
  • Manufacturer Festo
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

ADN ISO 21287 Pneumatic Cylinders- Flexible Cushioning

FESTO ADN series of compact pneumatic cylinder are up to 50% smaller than standard pneumatic cylinders for maximum productivity in confined spaces. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod. The extensive range of stroke length and bore size variants in the ADN series can be configured to suit a broad range of applications.

Pneumatic Cylinder Operation
The ADN series is a double acting actuator with air applied to extend and to retract the piston in a linear motion to the desired stroke length. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Cylinders are fitted with flexible polymer end cushioning helping to reduce noise and vibration, prolong service life and increase production and productivity.

Features and Benefits

Complies with ISO 21287 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Cushioning requires no adjustment saving maintenance time and cost

How do I mount the pneumatic cylinder?

The ADN series pneumatic actuators can be mount horizontally or vertically to suit the required application. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.


Attribute Value
Stroke 30mm
Bore 32mm
Action Double
Manufacturer Series ADN
Pneumatic Connection G 1/8
Piston Rod Thread Gender Female
Dimensions 47 x 47 x 80mm
Length 80mm
Width 47mm
Height 47mm
Maximum Operating Pressure 10 bar
Minimum Operating Temperature -20°C
Maximum Operating Temperature +80°C
6 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
Was $166.47
$ 127.40
(exc. GST)
$ 140.14
(inc. GST)
Per unit
1 - 4
5 +
Related Products
Cylinders Compact single and double acting cylinders, considerably ...
Cylinders Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs Space and weight saving Magnetic piston Proof pressure 15bar Operating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar max Supplied with tapered and parallel ports Temperature range ...
Solenoid Valve Series SV1000 & SV2000 SMC SV ...
Solenoid Valve Series SV1000 & SV2000 SMC SV Series employ multi-pin connectors in place of conventional lead wires within manifold blocks The design of the connector-type manifold enables any changes within the manifold station to be greatly simplified. Cassette base ...
SMC CQM Compact Guided/Guide Rod Cylinder SMC CQM ...
SMC CQM Compact Guided/Guide Rod Cylinder SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible ...
SMC MGP Compact Guide Cylinder with End Lock ...
SMC MGP Compact Guide Cylinder with End Lock SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and ...