Siemens PLC Power Supply 3RX950 Series AS-I Power Supply Unit, 120 V ac, 230 V ac, 30V dc, 5 A 125 x 70 x 125 mm

  • RS Stock No. 746-6117
  • Mfr. Part No. 3RX9502-0BA00
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): RO
Product Details

AS-i Power Supply - 3RX950 Series

AS-i Power Supplies for 35 mm DIN rail mounting

Integrated ground fault detection
Integrated overload detection
Remote reset and indication
LED status indication
IP20 rated

Approvals

CE, UL

//media.rs-online.com/t_line/L316042-01.gif

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specifications
Attribute Value
Manufacturer Series 3RX950
For Use With AS-I Power Supply Unit
Line Voltage 120 V ac, 230 V ac
User Power Output Voltage 30V dc
Output Current 5 A
Length 125mm
Width 70mm
Depth 125mm
Dimensions 125 x 70 x 125 mm
6 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 687.85
(exc. GST)
$ 756.63
(inc. GST)
units
Per unit
1 - 2
$687.85
3 - 3
$677.54
4 +
$667.39
Related Products
The Millenium 3 is the latest generation in ...
Description:
The Millenium 3 is the latest generation in the Millenium series. Improvements over the Millenium 2 Plus include:. Power supplies with breakers, regulated and protected against overload and short-circuits and easily integrated into boards and cabinets.The output voltage potentiometer adjusts ...
Quantum power supply modules serve two main functions ...
Description:
Quantum power supply modules serve two main functions - they provide power to the system rack and also protect the system from noise and voltage swings. Power supply modules feature both overcurrent and overvoltage protection. They are able operate in ...
AS-I is a method of providing communication from ...
Description:
AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.A unique feature of the AS-I system ...
The MFD-Titan multi-function display is available as modular ...
Description:
The MFD-Titan multi-function display is available as modular components which can be assembled to suit your requirements.,One option is to use a display unit mounted on the front of a panel, coupled directly to a rear of panel PSU-CPU logic ...