Pepperl + Fuchs PLC I/O Module 4 Inputs, 3 Outputs 21 → 31 V dc, 102 x 22.5 x 99 mm

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SG
Product Details

AS-I Actuator/Sensor DIN Rail Modules

22.5mm width housing
Removable terminals
Available with a variety of inputs/outputs

//media.rs-online.com/t_line/L316042-01.gif

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specifications
Attribute Value
Number of Inputs 4
Number of Outputs 3
Number of I/O 7
Voltage Category 21 → 31 V dc
Length 102mm
Width 22.5mm
Depth 99mm
Dimensions 102 x 22.5 x 99 mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
1 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 249.00
(exc. GST)
$ 273.90
(inc. GST)
units
Per unit
1 +
$249.00
Related Products
PSU-CPU-Logic Controller Modules These modules clip directly on ...
Description:
PSU-CPU-Logic Controller Modules These modules clip directly on the display unit mounting bosses on the rear of the panel Port for optional EEPROM memory module Programmed using easy-soft-PRO (see stock no 478-9937)24Vdc supply voltage Dimensions: H90 x W107.5 x D29.5mm ...
AC52xx - AS-i single slaves Digital field modules ...
Description:
AC52xx - AS-i single slaves Digital field modules Simple addressing Fast assembly of upper and lower sections without tools3 freely configurable directions for flat lead High IP67 protection rating AS-I is a method of providing communication from simple discrete components ...
Digital I/O expansion units I/O expansion module for ...
Description:
Digital I/O expansion units I/O expansion module for use with a nano Line base unit (eg. RS stock no.: 575-018)Galvanically separated Screw connection Top-hat rail mounting Supply voltage 24 Vdc (via base unit)Typical supply current 50 mA, max. 90 mATypical ...
AC2505/2507 - AS-i module top I/O modules for ...
Description:
AC2505/2507 - AS-i module top I/O modules for field applications Active Classic Line moduleAS-i interface to FK lower sectionsM12 x 1 socketsIR addressing possible4 inputs (AC2505)2 inputs and 2 outputs (AC2507) Standards EN50081-1, EN50295 AS-I is a method of providing ...