Kunbus Revolution Pi, 24 V, 2 kHz, Polycarbonate, IP20

  • RS Stock No. 181-1144
  • Mfr. Part No. PR100195
  • Manufacturer Kunbus
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Revolution Pi DI - Powered by Raspberry Pi

The RevPi DI, like its counterparts, the DO/DIO, features a 28 pin connector on the front side of the module (2 rows of 14 male pins) and comes with female connectors with spring clip contacts up to 1.5mm². The DI has 16 digital outputs.

Features and benefits

• Galvanic separation between the PiBridge logic circuit (uses its own power supply) protects against reverse polarity, over voltages and transient voltage or current interference adhering to the requirements of EN61131-2.
• PiBridge cyclically exchanges with the RevPi Core's central processing image using the PiControl driver. As per these exchanges occurring, any possible error conditions and configuration data is also cyclically transmitted.
• DC inputs have a voltage threshold of 24 V supply voltage which is compliant with EN61131-2 type 1 & 3 as input definitions. Your input current will be capped at a maximum of 2.4mA.
• Adjustable low-pass filtering that helps prevent input signal bouncing. The filter applies to all inputs or none. All the inputs are protected against any ESD interference, including bursts and surges compliant to EN61131-2.
• SPI data exchange monitoring is enabled on the DO. Safe states are run if no SPI traffic is detected and also if output power supply drops too low or the output circuit reached an over-temperature.
• DIN rail mountable (to EN 50022) & compact in size making it perfect to mount several where space restrictions may apply.
• Polycarbonate housing material prescribed to standard EN 61131-3 (resistance to vibration/shock/damp air/high&low temperatures)
• IP20 rated (effective sealing resistant to foreign bodies such as dirt/dust)
• Outputs not only come through digital signal but also a pulse-width modulated PWM signal


• Automotive sector
• Energy sector
• Lighting sector
• Home automation

With this digital input module, the RevPi Core can be extended by 16 digital inputs, thus creating the prerequisite for a small industrial controller. The expansion module is connected to the RevPi core via the top connector. The connector is included in the scope of delivery of this expansion module.

Attribute Value
Manufacturer Series Revolution Pi DI
Number of Inputs 16
Input Type Digital
For Use With Revolution Pi Connect, Revolution Pi Core
Number of I/O 16
Module Type Digital Input
Length 96mm
Width 22.5mm
Depth 110.5mm
Dimensions 96 x 22.5 x 110.5 mm
Supply Voltage 12 - 24 V dc
Mounting Type DIN Rail
Maximum Operating Temperature +55°C
Minimum Operating Temperature -40°C
Input Current 2.4mA
18 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 266.21
(exc. GST)
$ 292.83
(inc. GST)
Per unit
1 +
Related Products
Modicon M340 Counter Modules The counter modules for ...
Modicon M340 Counter Modules The counter modules for the Modicon M340 automation platform are used to count the pulses generated by a sensor or to process the signals from an incremental encoder 2-wire 24V proximity sensors3-wire 24V proximity sensors10/30V output ...
Analogue Output Module - 2 Channel with Transformer ...
Analogue Output Module - 2 Channel with Transformer Insulation These modules convert digital PLC values into 2 independent channels of analogue voltage or current outputs 16 bit resolution Fast conversion rate improves control Built-in EEPROM for storing set-up data Only ...
Analogue I/O Modules All offer the following ranges: ...
Analogue I/O Modules All offer the following ranges: 0-5V, 0-10V, 1-5V, ±10V and 4-20mAResolution: 12 bit (510-1423 and 512-5946 are 11 bit)Input up to eight analog signals with one unit CJ1 Digital I/O, Analogue I/O, and Communication modules clip together ...
ET 200S — digital electronic module Digital input ...
ET 200S — digital electronic module Digital input and outputs for the ET 200SConnect to terminal modules TM-E with automatic encryption High-spec version for increased system availability, additional functionality and extensive diagnostics Module exchange during operation subject to voltage (hot ...