Jumo 2 wire PT100 Sensor, -50°C min +600°C max, 300mm Probe Length x 3mm Probe Diameter

  • RS Stock No. 337-6883
  • Mfr. Part No. 902250/32-415-1003-1-3-300-11-2500/000
  • Manufacturer Jumo
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Sheathed resistance thermometer in accordance with IEC 751

Working temperature from -50 °C → +600 °C
Flexible, thin-walled sheathed wire made of stainless steel; the low-ohm copper internal conducting wires are embedded in compressed, fire-resistant magnesium oxide for vibration resistance
Two or three-conductor circuit
Rapid response times
Connection lead made of silicon, 2.5 m, cable temperature range: -50 °C → +180 °C
Application-specific installation lengths

Application

Chemical plants, power plants, pipelines, in engine building, on test benches and at all measurement sites where flexibility and problem-free replacement are desirable

Level gauge Ø: 3 mm
Level gauge length (EL): 100 / 200 / 300 mm
Specifications
Attribute Value
Sensor Type PT100
Probe Length 300mm
Probe Diameter 3mm
Minimum Temperature Sensed -50°C
Maximum Temperature Sensed +600°C
Termination Type Cable
Cable Length 2.5m
Number Of Wires 2
Accuracy Class B
Response Time 4 (Water) s, 41 (Air) s
4 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 124.53
(exc. GST)
$ 136.98
(inc. GST)
units
Per unit
1 - 4
$124.53
5 - 9
$119.66
10 +
$117.00
Related Products
The RS PRO 2 wire resistance thermometer has ...
Description:
The RS PRO 2 wire resistance thermometer has a Pt100 type sensor. It has a ceramic probe of 150mm long probe and a diameter of 4mm. It has a class B tolerance sensor. The wire wound RTD is suitable for ...
This range of Pt100 probes enables temperature measurement ...
Description:
This range of Pt100 probes enables temperature measurement under pressure in motors, compressors, plant engineering and ship building. They are easy to connect with standard DIN connector. Temperature range from -50°C to +300°CProbe length from 50 to 250mmTemperature measurement with ...
Screw-in resistance thermometer with sealable connection head, form ...
Description:
Screw-in resistance thermometer with sealable connection head, form JVarious installation lengths availableTwo versions available-400 °C type: with continuous protection tube-200 °C type: with recessed protection tube for air measurementProcess connection G1/2Protection tube: Stainless steel 1. 4571, Ø 7 or 6 ...
Sensors with one or two Pt 100, Class ...
Description:
Sensors with one or two Pt 100, Class A as per IEC751.3-wire or 2 x 3 wire fitting.316L stainless steel protected with hard-packed MgO insulation.Type A DAN connection head with BLS terminal block and PG16 cable gland output.