ABB CM10 PID Temperature Controller, 97 x 50mm, 2 Output Analogue, Relay, 100 → 240 V ac Supply Voltage ON/OFF
- RS Stock No. 736-2838
- Mfr. Part No. CM10/000S0E0/STD
- Manufacturer ABB
ControlMaster PID Controller CM10
The ControlMaster CM10 is a flexible PID process controller in a 1/8 DIN unit. Detailed process information is presented clearly on the CM10's full-colour TFT display and an intuitive operator interface simplifies configuration and operation. Scalable in both hardware and software functionality, a CM10 can be easily specified to meet the needs of your application requirements. Flexible control functionality including on/off, time proportioning, analogue PID, split output and autotune make the CM10 suitable for a wide range of process applications.
Fully configurable via the easy-to-navigate front panel menus or PC configuration software, the CM10 can be commissioned rapidly and then tuned via the advanced autotune functionality.
Features and Benefits
• Full-colour 5.5cm (2.2”) TFT display
• User-customisable, intuitive interface with clear text prompts for easy installation, commissioning and operation
• Scalable to match application requirements
• Comprehensive hardware and software options
• Flexible control functionality
• On/Off, time proportioning, analogue PID and split output
• IP66 and NEMA 4X environmental protection
Functionality:
The autotune capability in the CM10 provides automatic calculation of the PID values after initial setup and configuration is completed for rapid commissioning in whatever application.
8 Independent process alarms provide analogue signal monitoring to enable extensive process monitoring functionality. These alarms can be used to drive physical outputs and also have the ability to drive soft-wired functions within the controller itself.
Split output control configuration of the CM10 allows for controlling both heating and cooling of a single process if required.
I/O build:
• 2 Analogue inputs
• 1 Analogue O/P
• 1 Relay
Base Templates:
• Single loop with local setpoint
• Single loop with remote setpoint
| Attribute | Value |
|---|---|
| Output Type | Analogue, Relay |
| Supply Voltage | 100 → 240 V ac |
| Size | 97 x 50mm |
| Number of Outputs | 2 |
| Minimum Operating Temperature | 0°C |
| Maximum Operating Temperature | +55°C |
| Temperature Range | -250 → +300 (Type T Thermocouple) °C, -200 → +1300 (Type N Thermocouple) °C, -200 → +600 (Pt100) °C, -100 → +900 (Type E Thermocouple) °C, -100 → +900 (Type J Thermocouple) °C, -100 → +900 (Type L Thermocouple) °C, -100 → 1300 (Type K Thermocouple) °C, -18 → +1700 (Type R Thermocouple) °C, -18 → +1700 (Type S Thermocouple) °C, -18 → +1800 (Type B Thermocouple) °C |
| Control Type | ON/OFF |
| Display Type | LCD, Multi Line, TFT |
| IP Rating | IP66 |
| Range | ControlMaster CM10 |
| Display Colour | Green, Red, Yellow |
| Series | CM10 |
| Panel Depth | 121mm |
