Martindale RSPC15250 Phase Rotation Tester CAT IV 600V CAT IV 600 V 60Hz 600V ac, Model PC 15250

  • RS Stock No. 782-4424
  • Mfr. Part No. PC15250
  • Manufacturer Martindale
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PH
Product Details

Phase Rotation & Continuity Indicator Martindale PC15250

This indicator will prove continuity, or identify fault condition, of all three lines and shows the sequence of phase rotation. It's a fast, effective method of identifying worn or unmarked cables and ensures 3-phase outlets and machines are wired correctly. The retractable GS38 probe shields give a choice of long, exposed tips for inaccessible contacts or safer, shorter lengths for increased safety.

Caution

The above unit should be checked for correct operation using a known voltage before and after use.

Supplied with

One fused crocodile clip, two fused prods with retractable GS38 shrouds, instructions

Both versions supplied with: A plastic wallet and full instructions for use.

Caution

The above unit should be checked for correct operation using a known voltage before and after use.

Specifications
Attribute Value
Connection Type Crocodile Clip, Test Probe
Overvoltage Category CAT IV 600V
Safety Category CAT IV 600 V
Current Consumption 3mA
Dimensions 116 x 69 x 25mm
Weight 361g
Height 25mm
Length 116mm
Maximum Frequency 60Hz
Maximum Voltage 600V ac
Minimum Operating Temperature -10°C
Safety Category Level CAT IV
Minimum Frequency 40 Hz
Model Number p PC 15250
Minimum Voltage 50V ac
Maximum Operating Temperature +55°C
Width 69mm
Safety Category Voltage 600V
3 : Next working day (AU stock)
32 : 7 working days (Global stock)
Price (ex. GST) Each
$ 278.22
(exc. GST)
$ 306.04
(inc. GST)
units
Per unit
1 +
$278.22
Related Products
The Fluke power quality clamp meter is the ...
Description:
The Fluke power quality clamp meter is the ideal meter for commissioning and troubleshooting modern electrical loads With a bright colour display to analyse the harmonic spectrum, a low-pass filter to remove high-frequency noise, and a high EMC immunity design, ...
2046R AC/DC True RMS Clamp Meter CATIV Clamp ...
Description:
2046R AC/DC True RMS Clamp Meter CATIV Clamp Meters can measure voltages and currents in both very low and high power circuits6039 counts with Bar Graph display Red LED, as "Non Contact Voltage" function, gives warning to the user of ...
The Fluke True-RMS clamp meter measures the current ...
Description:
The Fluke True-RMS clamp meter measures the current up to 2000A (AC/DC) The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and ...
C 160 ammeter probe Current clamp for oscilloscopeMeasurement ...
Description:
C 160 ammeter probe Current clamp for oscilloscopeMeasurement of alternating current up to 1000 A AC.3 measuring gauges:1000 ARMS, 100 ARMS, 10ARMS.Voltage output.Electronic output protection against overvoltages. Standards IEC-1010-1 and IEC 1010-2-032, 600 V, Cat. III, deg. 2. Current clamp ...