- RS Stock No.:
- 213-3059
- Mfr. Part No.:
- PEX2IDE
- Brand:
- StarTech.com
- RS Stock No.:
- 213-3059
- Mfr. Part No.:
- PEX2IDE
- Brand:
- StarTech.com
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- TW
Product Details
StarTech.com IDE Adapter Card, PCIe Bus Type, 133Mbps Transfer Rate - PEX2IDE
Convert your PCIe ports to IDE channels with this adapter card from StarTech.com. Its dual-channel IDE port can support two drives at the same time, making it a space-efficient option. You'll find adapter cards like this used in desktop computers to connect motherboards to disk storage devices such as CD-ROM.
Supports commonly used operating modesThis component offers support for programmable I/O and Ultra DMA 33/66/100/133 operating modes, for versatility.
Plug-and-play operationFor fast and easy installation, the unit automatically identifies PCIe modes.
High transfer rateThanks to transfer speeds up to 133Mbps, data transmission is reliably quick.
Plug-and-play operationFor fast and easy installation, the unit automatically identifies PCIe modes.
High transfer rateThanks to transfer speeds up to 133Mbps, data transmission is reliably quick.
• Single PCIe port for connecting to legacy drives
• Offers support for ATA and ATAPI commands, to enable easy integration with motherboards
• Offers support for ATA and ATAPI commands, to enable easy integration with motherboards
The Startech 1 Port PCI Express IDE Controller adapter card provides a cost-effective way to use legacy drives with modern computers, by converting a PCI Express port into an IDE port.
FAQs
2-channel IDE port supports two drives
48-bit LBA support
Supports ATA/ATAPI commands
Supports UDMA 6 mode which supports transfer rates up to 133 MBps
Includes a low profile installation bracket
48-bit LBA support
Supports ATA/ATAPI commands
Supports UDMA 6 mode which supports transfer rates up to 133 MBps
Includes a low profile installation bracket
What addressing scheme does this unit use?This unit supports a 48-bit logical block address scheme to enable backward compatibility with older devices.
Specifications
Attribute | Value |
---|---|
Type | PCI Express Controller Adapter Card |
Supported Form Factor | IDE |
Dimensions | 230 x 165 x 42mm |
Number of Drives Supported | 0 |