Pico Technology Oscilloscope Probe, Probe Type: Active, Differential 100MHz 700V

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

Pico 100MHz 700V Differential Probe TA043, 10:1/100:1

Pico TA043 is an active differential probe suitable for high common-mode voltage measurement applications up to ±700V (DC + peak AC). It is capable of acquiring higher speed signals of up to 100MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low speed balanced differential signals found in serial communications buses.

Bandwidth DC to 100MHz (–3 dB)
Attenuation 10:1/100:1
Rise time 3.5ns
Accuracy ±2%
Input impedance 4MΩ ll 7pF each side to ground
Input voltage differential range (10:1) ±70V (DC + peak AC) or 70VRMS
Input voltage differential range (100:1) ±700V (DC + peak AC) or 500VRMS
Common mode range ±700V (DC + peak AC) or 500VRMS (10:1 and 100:1)
Absolute maximum voltage (differential or common mode) 1000VRMS CAT III (10;1 & 100:1)
Swing (into 50 kΩ load) ±7V
Offset (typical) <±5mV
Noise (typical) 0.9mVRMS
Source impedance (typical) 50Ω
CMRR (typical) 85dB @ 50Hz; 55dB @ 1MHz
Ambient operating temperature -10 to +40°C
Ambient storage temperature -30 to +70°C
Power requirement 4xAA cells or 6VDC/200mA mains adaptor or regulated 9VDC/120mA mains adaptor
Length of input leads 30cm
Length of BNC lead 90cm
Weight 500g
Dimensions 202 x 83 x 38 mm

Pico Technology Oscilloscope Probe

The Pico Technology TA043 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±7000V. It can be used with a signal speed of up to 100MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.

Features and Benefits

• Bandwidth is DC to 100MHz (–3dB)
• Attenuation ratio is 10:1/100:1
• Accuracy is ±2%
• Input impedance is 4Mohm ll7pF each side to ground
• Differential range is (10:1) ±70V (DC + peak AC) or 70VRMS
• Maximum differential is (100:1) ±700V (DC + peak AC) or 500VRMS
• Common mode range is ±700V (DC + peak AC) or 500VRMS (10:1 & 100:1)
• Absolute maximum voltage is ±1000VRMS CATIII 10:1 & 100:1)
• Swing is ±7V into 50Kohm load
• Offset (typical) is <±5mV
• Noise (typical) is 0.9mVRMS
• Source impedance is 50
• CMRR (typical) is 85dB at 50Hz and 55dB at 1MHz
• Ambient operating temperature ranges between -10°C and 40°C
• Power requirement 4xAA cells or 6VDC/200mA mains adaptor or regulated 9VDC/120mA mains adaptor

Applications

• Safe measurement in power circuit
• Acquisition of low speed balanced differential signals found in serial communication buses
• Transients in switching power supplies, inverters and motor drives, electronic ballasts and CRT displays
• Signals in the milliV range from sensors and other instrumentation

Certifications

• IEC-1010.1
• IEC-1010.2-031 CAT III
• Pollution Degree 2.

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:10, 1:100
Bandwidth 100MHz
Maximum Common Mode Input Voltage 700V
Number of Probes 2
Safety Category Level CAT III
Safety Category Voltage 500 Vrms, 700 V ac/dc
Safety Category CAT III 700 V ac/dc, 500 Vrms
Rise Time 3.5ns
5 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 1,018.11
(exc. GST)
$ 1,119.92
(inc. GST)
units
Per unit
1 +
$1,018.11
Related Products
A pair of BNC Terminated oscilloscope probes, perfect ...
Description:
A pair of BNC Terminated oscilloscope probes, perfect for use with the Analogue Discovery™ in conjunction with the Discovery BNC Adapter BNC Terminated Selectable 1X/10X input attenuation Contraction hook tip12cm ground clip Localization sleeve adapts to IC testing Input resistance:1x1MΩ10x10MΩInput ...
For high-speed switch mode power supply design; CAN/LIN ...
Description:
For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 MHz 50X attenuation) ...
For design, validation, debugging and characterization of common ...
Description:
For design, validation, debugging and characterization of common high-speed serial bus designs including I2C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 20, Fire Wire (1394b); signal integrity, jitter and timing analysis; manufacturing engineering and test. Accurate measurements for serial and ...
High quality passive voltage probes suitable for use ...
Description:
High quality passive voltage probes suitable for use with Tektronix oscilloscopes or as general purpose replacements Each probe features compensation trimmers to allow matching to instruments. Supplied complete with accessories Rated voltage CAT II 300V rms, CAT I 400V rms. ...