Tektronix P5200A Oscilloscope Probe, Probe Type: Differential, High Voltage 50MHz 1kV

  • RS Stock No. 734-5029
  • Mfr. Part No. P5200A
  • Manufacturer Tektronix
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): CN
Product Details

Tektronix Oscilloscope Probes

The Tektronix is active deferential voltage oscilloscope probe has a bandwidth of 50MHz and permits selection of 50x or 500x attenuation. It converts floating signals to low voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.
TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most commonly required set-up controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope.
The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded.
Supplied with
2 hook clips
2 pincer clips
2 alligator clips
2 extension cables
Do not use the P5200A with scopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000 Series. The P5200A requires an oscilloscope or other measurement instruments with grounded inputs.

Features and Benefits

Bandwidth is DC to 50MHz
Attenuation ratio is 1:50 and 1:500
Input impedance is 5Mohmll4pF
Maximum common mode voltage is ±1.3KV
Maximum Input voltage is 1000V CAT II
Wide compensation range (7pF to 30pF)
CMRR (typical) is 100kHz: > -60dB 3.2MHz: > -30dB 100MHz: > -26dB
Overrange indicator
Safety certified
Switchable attenuation
Switchable bandwidth limit
Cable length 1.5m (THDP & TMDP), 1.8m (P52xxA)


Floating measurements
Switching power supply design
Motor drive design
Electronic ballast design
CRT display design
Power converter design and service
Power device evaluation
BNC interface (P5200A probes)
TekVPI interface (TMDP and THDP Series probes)
TekProbe interface


EN 61010-031
UL 61010-031 listed
IEC 61010-031
IP20 Rating

Attribute Value
Probe Type Differential, High Voltage
Attenuation 1:50, 1:500
Bandwidth 50MHz
Maximum Common Mode Input Voltage 1kV
Model Number p P5200A
Safety Category Level CAT II
Safety Category Voltage 1000V
Series P52XXA
Safety Category CAT II 1000 V
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
$ 1,960.80
(exc. GST)
$ 2,156.88
(inc. GST)
Per unit
1 +
Related Products
The Tektronix MDO3000 series 500MHz mixed domain oscilloscope ...
The Tektronix MDO3000 series 500MHz mixed domain oscilloscope offers a 9inch WVGA widescreen colour display This product has 4 analogue channels. This oscilloscope is multi-functional with an integrated basic spectrum analyser, wave inspector navigation, MSO, serial and parallel bus triggering ...
DPO2000 Series First entry-level oscilloscopes featuring 1GS/s sampling ...
DPO2000 Series First entry-level oscilloscopes featuring 1GS/s sampling rate and optional parallel bus trigger and decode modules "Digital phosphor" technology enables real-time intensity grading of the signal, mimicking the effect of a VT phospor oscilloscope display. 100 MHz, and 200 ...
The Digilent BNC terminated oscilloscope probe is perfect ...
The Digilent BNC terminated oscilloscope probe is perfect to use with the Analogue Discovery™ in conjunction with the Discovery BNC adapter Bandwidth for 1x DC to 6MHz and 10x DC to 100MHz Selectable 1X/10X input attenuation Input resistance is 1x1Mohm ...
30 & 50 MHz differential probes for MX 9030-Z, MTX 1032-B and MTX 1032-C oscilloscopes An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground!A range of three models to fulfil different ...