Tektronix P5122 Oscilloscope Probe, Probe Type: High Voltage, Passive 200MHz

  • RS Stock No. 712-1141
  • Mfr. Part No. P5122
  • Manufacturer Tektronix
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
Product Details

TPS2000 Accessories

Accessories available for Tektronix TPS2000 Series digital storage oscilloscopes include: passive probes P2220 ( 481-0823 ) & P5122 ( 712-1141 ); current probes A621 ( 851-218 ) & A622 ( 851-224 ); power measurement and analysis bundle TPS2PBND2 ( 712-1145 ); battery TPSBAT ( 481-0867 ) & battery charger TPSCHG ( 481-1290 ); soft carrying case AC2100 ( 481-0845 ) & hard carrying case HCTEK4321 ( 613-1510 ).

Note

Tektronix Oscilloscope Probes

The Tektronix oscilloscope probe when coupled with the TPS2000 and THS3000 series digital storage oscilloscopes, delivers both the isolation for the measurement from earth ground and full isolation between the channels. It is the recommended probe for measuring ripple on high voltage DC supplies. This probe should not be used on the TPS2000 series oscilloscopes for AC coupled measurements on signals with greater than 300VDC offset.

Features and Benefits

• Bandwidth is DC to 200MHz
• Attenuation ratio is 1:100
• Input impedance is 100Mohmll4pF
• Rise time is 2.2ns
• Floatable up to 600VRMS CAT II
• Maximum Input voltage DC or RMS is 1000VRMS CAT II
• Wide compensation ranges between 7pF and 30pF

Applications

• Power supply design
• Design motor drive
• Electronic ballast
• Power semiconductors
• Switch mode control
• UPS systems
• Power converters

Certifications

• IEC61010-031
• CAT II 1000 VAC
• CAT II 600VAC

Specifications
Attribute Value
Probe Type High Voltage, Passive
Attenuation 1:100
Bandwidth 200MHz
Model Number p P5122
Safety Category Level CAT II
Safety Category Voltage 600 V ac, 1000 V ac
Series TPS2000
Safety Category CAT II 1000 V ac, CAT II 600 V ac
Rise Time 2.2ns
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each
$ 551.25
(exc. GST)
$ 606.37
(inc. GST)
units
Per unit
1 +
$551.25
Related Products
DPO2000 Series First entry-level oscilloscopes featuring 1GS/s sampling ...
Description:
DPO2000 Series First entry-level oscilloscopes featuring 1GS/s sampling rate and optional parallel bus trigger and decode modules "Digital phosphor" technology enables real-time intensity grading of the signal, mimicking the effect of a VT phospor oscilloscope display. 100 MHz, and 200 ...
Tektronix TDP1500, TDP3500 For design, validation, debugging and ...
Description:
Tektronix TDP1500, TDP3500 For design, validation, debugging and characterization of common high-speed serial bus designs including I2C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 20, Fire Wire (1394b); signal integrity, jitter and timing analysis; manufacturing engineering and test. Accurate measurements ...
Tektronix TDP0500, TDP1000 For high-speed switch mode power ...
Description:
Tektronix TDP0500, TDP1000 For high-speed switch mode power supply design; CAN/LIN bus design; high-speed digital design; digital design and characterization; manufacturing engineering test; research and development ±42 V (DC + pk AC) differential input voltage 18 dB CMRR (at 250 ...
Le Croy Wave Surfer Xs-A and MXs-A Designed ...
Description:
Le Croy Wave Surfer Xs-A and MXs-A Designed to make everyday testing simpler and easier, with intuitive user interface offering single-touch to common measurements and functions Dimensions 260 (H) x 340 (W) x 152 (D) mm Local language user interface ...