P.M.A D280-1 Temperature Indicator, 48 x 96mm, 90 → 250 V ac Supply

  • RS Stock No. 736-5039
  • Mfr. Part No. D280-110-0000D-000
  • Manufacturer P.M.A
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): DE
Product Details

PMA D280-1 Temperature Controller

The PMA Digital 280-1 indicator ensures a fast reaction time with a scan rate of 100ms cycle time.

The instrument offers customer-specific linearization for all sensors (16 segments). The maximum and minimum values are always stored and may be displayed on the front for quick reference. In addition to an indicator the Digital 280-1 can also be used as a signaller, on/off controller, two-point controller or a continuous controller.

The Digital 280-1 indicator is suitable for use in the following applications: Furnaces and ovens, Burners and boilers, Weighing and batching, Process control & Plastics processing.

• Horizontal form factor. 48mm high x 96mm wide
• BluePort® Front interface and BlueControl® Software
• Maintenance manager and error list
• 5-digit, 20mm big display
• Limit signalling functions with hysteresis, discriminator time and rate of change monitor
• ON/OFF-, 2-point- and continuous controller
• Oxygen measurement with high-impedance input

Supplied with

German Manual

PMA Temperature Controllers

Specifications
Attribute Value
Input Type B Type Thermocouple, C Type Thermocouple, Current, D Type Thermocouple, E Type Thermocouple, J Type Thermocouple, K Type Thermocouple, L Type Thermocouple, N Type Thermocouple, PT1000 Type Resistance Transducer, R Type Thermocouple, S Type Thermocouple, T Type Thermocouple, Voltage
Supply Voltage 90 → 250 V ac
Range -500 → 500 mV, -200 → +200 (Pt1000 Type Resistance Transducer) °C, -200 → +400 (T Type Thermocouple) °C, -200 → +850 (Pt100 Type Resistance Transducer) °C, -100 → +1000 (E Type Thermocouple) °C, -100 → +1200 (J Type Thermocouple) °C, -100 → +1300 (N Type Thermocouple) °C, -100 → +1350 (K Type Thermocouple) °C, -100 → +900 (L Type Thermocouple) °C, -25 → 1150 mV, -25 → 90 mV, -5 → 5 V, -2.5 → 115 mV, 0 → +1760 (R Type Thermocouple) °C, 0 → +1760 (S Type Thermocouple) °C, 0 → +1820 (B Type Thermocouple) °C, 0 → +2315 (C Type Thermocouple) °C, 0 → +2315 (D Type Thermocouple) °C, 0 → 10 V, 0 → 20 mA
Size 48 x 96mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
Panel Depth 118mm
Series D280-1
1 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 438.97
(exc. GST)
$ 482.87
(inc. GST)
units
Per unit
1 +
$438.97
Related Products
11 pin base10 programmable alarm functions Programmable offset ...
Description:
11 pin base10 programmable alarm functions Programmable offset (reset)Direct or reverse action Programmable setpoint limits Password protected Conforms to generic standards EN50081-1 and EN50082-1 for EMC and EN61010-1 for low voltage Dimensions: H48 x W48 x D90mm
Universal process indicators that are fully configurable with ...
Description:
Universal process indicators that are fully configurable with linear input signal range, thermoresistance, thermocouple or thermistor2 configurable alarm outputs and normally open contact (N/O).Indication of the size measured by an adhesive label on the front face (for most common physical ...
Automatic maximum & minimum storage Decimal point selectable ...
Description:
Automatic maximum & minimum storage Decimal point selectable Reverse polarity protection5 measurements per second (display refresh every 1-2 seconds)Resolution: 001°C (0.1°F) or 1°C (1°F)Accuracy: PT100 0.1%, Ni100 0.2%Temperature drift: 0.01K/K ambient Operating temperature: -20 to +65°CDIN 24 x 48mm housing; ...
Gefran 40T microprocessor based indicator offers configuration via ...
Description:
Gefran 40T microprocessor based indicator offers configuration via the faceplate This also supports a frontal Lexan© membrane faceplate which offers IP65 protection. This series benefits from accepting a comprehensive range of sensor inputs. A digital input (24Vdc / 4mA) is ...