TE Connectivity DPDT Non-Latching Relay PCB Mount, 5V dc Coil, 2 A

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CZ
Product Details

TE Connectivity SMT Telecom/Signal Relay P2 V23079 Series

P2 V23079 series DIP vertical mount SMT signal / telecom relays with a 15 x 7.5mm slimline design and 2A DPDT bifurcated gold plated silver nickel contacts. These SMT signal relays are immersion cleanable, have overmolded monostable coils (apart from stock number 718-1998 which has a monostable high dielectric coil) and offer a high sensitivity resulting in a low 140mW/70mW power consumption. Stock numbers 515-565, 515-577 and 756-1274 have long SMT pins whilst 718-1812 and 718-1998 have short SMT pins. Typical applications for these P2 V23079 series DIP vertical mount SMT signal relays include communications equipment (ringing and test access, PABX and VOIP), consumer electronics (set top boxes & HiFi), office, control, medical and automotive equipment

2 pole polarised telecom and signal relay with an overmoulded single coil
Long or short SMT legs
Bifurcated contacts, gold plated
Immersion cleanable, RTIII, IP67
V-0 flammability classification
Insulation resistance at 500Vdc >109Ω
High sensitivity resulting in low nominal power consumption - 140mW
Surge capability meets Telcordia TR-NWT-001089 (2 / 10 μs) and IEC 60950 (10 / 700 μs), 2000V between open contacts and 2500V between coil and contacts
Applications include; Communications equipment (ringing and test access, PABX and VOIP), Consumer electronics (Set Top Boxes & HiFi), Office, Control, Medical and Automotive equipment

Approvals

UL

//media.rs-online.com/t_line/L0515565-01.gif
Specifications
Attribute Value
Coil Voltage 5 V dc
Coil Power 140mW
Coil Resistance 178 Ω
Isolation Coil To Contact 1.5kV rms
Contact Configuration DPDT
Contact Material Gold Plated
Mounting Type PCB Mount
Maximum Switching Voltage AC 250V
Terminal Type Surface Mount
Maximum Switching Voltage DC 220V
Dimensions 14.6 x 9.4 x 9.9mm
Operating Temperature Range -40 → +85°C
Maximum Switching Power DC 60 W
Application Signal
Length 14.6mm
Minimum Operating Temperature -40°C
Height 9.9mm
Maximum Switching Power AC 62.5 VA
Maximum Operating Temperature +85°C
Depth 9.4mm
1530 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 4.18
(exc. GST)
$ 4.60
(inc. GST)
units
Per unit
1 - 14
$4.18
15 - 49
$4.07
50 - 99
$3.97
100 - 249
$3.85
250 +
$3.75
Related Products
The Corcom SRB series of general purpose power ...
Description:
The Corcom SRB series of general purpose power inlet filters are suitable for wide band RFI suppression in applications where limited space is available for the unit. These power inlet filters feature the smallest depth available in the Corcom range ...
The FN9280 & FN9290 series ultra-compact shielded IEC ...
Description:
The FN9280 & FN9290 series ultra-compact shielded IEC inlet filters with a combined dual fuse holder and 2-pole rocker switch. The flange mounting variant is supplied with a kit to fascinate either front or rear mounting using either a horizontal ...
The FN280 power entry module combines an IEC ...
Description:
The FN280 power entry module combines an IEC inlet, a mains filter with single or dual- fuse holder and a 2-pole rocker switch in a small form factor. A wide selection on amperage ratings, fuse options, mounting possibilities and filters ...
The THM-3WI series is a range of medical ...
Description:
The THM-3WI series is a range of medical 3 W DC-DC converters in DIP-24 plastic package and with ultra-wide 2:1 input voltage range. They provide a reinforced isolation system for 5000 V ac RMS isolation and a low leakage current ...