Phoenix Contact UT 4-MTD RD Series Grey Feed Through Terminal Block, 4mm², Single-Level, Screw Termination, ATEX, IECEx
- RS Stock No.:
- 648-4280
- Mfr. Part No.:
- 3046184
- Brand:
- Phoenix Contact
On back order for despatch 03/05/2024, delivery within 10 working days from despatch date.
Added
Price (ex. GST) Each
$2.18
(exc. GST)
$2.40
(inc. GST)
Units | Per unit |
1 + | $2.18 |
- RS Stock No.:
- 648-4280
- Mfr. Part No.:
- 3046184
- Brand:
- Phoenix Contact
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
Phoenix Contact Feed-Through Terminal Block, ATEX Certified, 2 Connections - UT 4-MTD - 3046184
Want to link two wires together in your electrical setup? Pass them through this feed-through terminal block from Phoenix Contact and the job's done. The unit's compatible with wires ranging in size from 26 to 10AWG, so it's a flexible solution. An open side panel lets you access the terminals in a jiffy, so there's no need to remove the unit for maintenance or inspection.
This terminal block comes in PA housing that provides insulation against electrical hazards. A rated surge voltage of 8kV means it doesn't back down in the face of voltage spikes, so your equipment is in safe hands. Thanks to a wide operating temperature range between -60°C and +105°C, the device doesn't break a sweat in demanding industrial environments. Mount it in a snap by simply clipping it onto a DIN rail.
This terminal block comes in PA housing that provides insulation against electrical hazards. A rated surge voltage of 8kV means it doesn't back down in the face of voltage spikes, so your equipment is in safe hands. Thanks to a wide operating temperature range between -60°C and +105°C, the device doesn't break a sweat in demanding industrial environments. Mount it in a snap by simply clipping it onto a DIN rail.
• Flammability rating of UL 94-V0 indicates that burning stops in 10 seconds or less, for enhanced fire safety
• Complies with DIN EN 50274 (VDE 0660-514):2002-11 standards for protection against electric shock
• ATEX certification means it's a safe bet for use in potentially explosive environments
• Complies with DIN EN 50274 (VDE 0660-514):2002-11 standards for protection against electric shock
• ATEX certification means it's a safe bet for use in potentially explosive environments
Phoenix Contact CLIPLINE UT Range
Specifications
Attribute | Value |
---|---|
Colour | Grey |
Number of Levels | Single |
American Wire Gauge | 26 → 10AWG |
Series | UT 4-MTD RD |
Termination Method | Screw |
Cable CSA | 4mm² |
Voltage Rating | 800 V |
Current Rating | 32A |
Minimum Operating Temperature | -50°C |
Maximum Operating Temperature | +110°C |
Hazardous Area Certification | ATEX, IECEx |
Standards Met | IEC |
Model Number | UT 4-MTD |