Entrelec, SNA Series , 380 V ac Standard Din Rail Terminal, Screw Termination

  • RS Stock No. 454-700
  • Mfr. Part No. 1SNA115542R1200
  • Manufacturer Entrelec
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Triple Deck and Sensor

For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.

Note

Not all types may be available

//media.rs-online.com/t_line/L454693-05.gif
//media.rs-online.com/t_line/LE454693-02.gif

Approvals

7777

Specifications
Attribute Value
Series SNA
Cable CSA 2.5mm²
Colour Grey
Current Rating 22A
Number of Levels Triple
Termination Method Screw
Voltage Rating 380 V ac
Pitch 6mm
Minimum Operating Temperature -5°C
Maximum Operating Temperature +40°C
15 : Next working day (AU stock)
510 : 5 working days (Global stock)
Price (ex. GST) Each (In a Pack of 5)
$ 7.864
(exc. GST)
$ 8.65
(inc. GST)
units
Per unit
Per Pack*
5 +
$7.864
$39.32
*price indicative
Related Products
Offering compactness and precision these ballscrews give improved ...
Description:
Offering compactness and precision these ballscrews give improved efficiency over conventional leadscrew arrangements at a relatively low cost Available with either an unprocessed shaft end for machining to a particular application or a processed shaft end for use with a ...
Small ball screw, easy installation Recirculating ball mechanism ...
Description:
Small ball screw, easy installation Recirculating ball mechanism Ballnut mounting thread Leadscrew shaft ends unprocessed
Standard series, mounting dimensions per DIN 69 051, ...
Description:
Standard series, mounting dimensions per DIN 69 051, Part 5 Flange type C Standard seals With backlash, reduced backlash, preload 2%; 3%; 5%For precision rolled screws SN-R of tolerance grade T5, T7, T9.
Small ball screw, easy installation Recirculating ball mechanism ...
Description:
Small ball screw, easy installation Recirculating ball mechanism Ballnut mounting thread Leadscrew shaft ends unprocessed