Preventa XCS-DMP Magnetic Safety Switch, Plastic, 24 V dc

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

XCS-DMC/XCS-DMP Coded Magnetic Switches, Rectangular

XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm (5mm for XCS-DMC).
XPS-DM safety modules are specifically designed for monitoring the coded magnetic safety switches. When the XCS-DM safety switch is used in conjunction with the XPS-DM safety relay they offer a certified safety solution for guard monitoring.

Coded magnetic safety switch

Actuation on 3 sides: face to face and face to side
8mm tolerance to misalignment (5mm for XCS-DMC)
LED versions have an LED in series with one N/C giving indication when guard is closed
Coded reed technology - switch cannot be totally defeated by a simple magnet
Rectangular plastic housing
Dimensions: compact: H51 x W16 x D7mm, standard: H88 x W25 x D13mm
Available pre-cabled or with connector on flying lead
IP66/67 protection in accordance with EN/IEC 60529
ROHS compliant

Safety module

Allows multi-switch monitoring to Safety Category 4 solutions in accordance with EN954-1/ISO 13849-1
XPS-DMB can monitor 2 independent sensors and modules, XPS-DME can monitor 6 independent sensors and modules
2 safety outputs and 2 solid state outputs for signalling to the process PLC
LEDs on the front face provide information on the monitoring circuit status
Dimensions: H99 x W22 x D114mm
IP20 protection on terminals and IP40 protection on enclosure, in accordance with EN/IEC 60529

Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Standards

IEC 947-1; EN 547-5-1; EN 547-5-3; EN 60204-1; EN 1088 (for Magnetic Switch only)
IEC 204-1; EN 292; EN 60204-1; EN954-1; EN1088 (for Safety Module only)

Specifications
Attribute Value
Supply Voltage 24 V dc
Housing Material Plastic
Range Preventa
Series XCS-DMP
Switching Distance 8 mm
IP Rating IP66, IP67
Actuator Included Yes
Depth 13mm
Dimensions 88 x 25 x 13 mm
Length 88mm
Safety Category 4
Actuator Type Coded
Number of Approach Directions 3
Width 25mm
Sensor Principle Magnetic
12 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 151.88
(exc. GST)
$ 167.07
(inc. GST)
units
Per unit
1 +
$151.88
Related Products
With no need for a separate safety relay ...
Description:
With no need for a separate safety relay this device saves space in the cabinet with no loss of functionality and is easy to install. provides Cat 3//4 or SIL 2//3 protection on moveable machine guards or where frequent washdown ...
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
Substitutes door handle and safety switch in one ...
Description:
Substitutes door handle and safety switch in one IP67 rated unit, no further door fittings requiredIdeal for small and light movable guards (rotating doors max. 5kg, sliding doors max. 3kg) Tamper-proof due to integral coded safety sensorControl category up to ...
The PSEN cs2.2p safety switch is fully coded ...
Description:
The PSEN cs2.2p safety switch is fully coded and the coding is unique which means it will only switch with the supplied actuator. If the actuator/switch is lost or broken, you will need to buy a new set. Series connection ...