PSENslock Magnetic Safety Switch, Plastic, 24 V dc

  • RS Stock No. 744-8682
  • Mfr. Part No. 570502
  • Manufacturer Pilz
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Pilz Safety Gate System

The Pilz PSENslock series safety gate system has an assured release distance of 8mm. It has 2OSSD RFIDsafety outputs. It is a non-contact safety gate system which combines safety gate monitoring and a non-contact magnetic interlock in a single unit. The combination of safe position monitoring and process guarding make the PSENslock suitable for universal use and high category applications. This magnetic guard locking device is largely non-wearing, as compared to mechanical technologies.

Features and Benefits

Input The supply voltage is 24VDC
Holding force is 500N
Unique coding
System optimised for safe position monitoring with process guarding
high-level of manipulation protection (coding)
Process protection through magnetic guard locking
Four assembly directions
Tolerant to gate misalignment
Flexible connectors
Optimised for mounting on to 45mm profiles
User-friendly diagnostics via double sided LED display
Long product service life as it is mechanically non-wearing
Housing material is Anticorodal, hard anodised
Connection type is M12, 8-pin male
Operating temperature ranges between -25°C and 55°C

Certifications

IP67 rated
PLe Cat. 4
CE certified
cULus approved
TÜV certified
FCC certified
IC certified
EAC (Eurasian) certified

Specifications
Attribute Value
Supply Voltage 24 V dc
Housing Material Plastic
Connection Type 8-Pin
Series PSENslock
Switching Distance 1 mm
IP Rating IP67
Actuator Included Yes
Safety Category 4
Sensor Principle Magnetic
Actuator Type Coded
Width 45mm
Dimensions 122 x 45 x 44 mm
Depth 44mm
Length 122mm
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
$ 1,029.62
(exc. GST)
$ 1,132.58
(inc. GST)
units
Per unit
1 +
$1,029.62
Related Products
The Telemecanique Sensors XCS-DMP series magnetic safety switch ...
Description:
The Telemecanique Sensors XCS-DMP series magnetic safety switch has 8mm tolerance to misalignment This means that it can protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater ...
BNS 303, Coded, Barrel Control category up to ...
Description:
BNS 303, Coded, Barrel Control category up to 3 to EN954-1Output function indicated at rear of switch by LEDIP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm Note Actuating magnet not included Caution ...
BNS 260, Miniature Coded Smallest design Actuation only ...
Description:
BNS 260, Miniature Coded Smallest design Actuation only possible with BPS260, available separately Left-hand or right-hand side versions for door-mounting Control category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlocking Dimensions: L13 x W26 x H36 ...
The Pilz PSENmag series non-contact safety switch has ...
Description:
The Pilz PSENmag series non-contact safety switch has an assured switching distance of 8mm It has 2NO safety contact. It meets the highest safety requirements and offers a complete solution that is safe and economical.Supplied with actuator Caution: EN60947-5-3 standard ...