BNS300 Magnetic Safety Switch, Plastic, 24 V dc

  • RS Stock No. 623-3183
  • Mfr. Part No. BNS 300-01ZG-2M
  • Manufacturer Schmersal
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

BNS 300, Coded, Integral Evaluation

Control category 1 to EN954-1
Output function indicated at rear of switch by LED
Ideal for lower risk applications, integral evaluation means no additional safety module is required
IP67 protection
Suitable for food processing industry

Note

The actuating magnet is not included with the sensor and must be ordered separately.

Caution

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS30 with integral evaluation) and magnet (BPS) is used

Standards

IEC/EN60947-5-3, BG-GS-ET-14, EN1088

Approvals

BG, UL, CSA

Caution

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS30 with integral evaluation) and magnet (BPS) is used

Specifications
Attribute Value
Supply Voltage 24 V dc
Housing Material Plastic
Terminal Type Cable
Series BNS300
IP Rating IP67
Actuator Included No
Safety Category 4
Length 78mm
Sensor Principle Magnetic
Actuator Type Coded
Housing Colour Black
Width 30 (Dia.)mm
Dimensions 30 (Dia.) x 78 mm
2 : Next working day (AU stock)
16 : 5 working days (Global stock)
Price (ex. GST) Each
$ 227.09
(exc. GST)
$ 249.80
(inc. GST)
units
Per unit
1 - 5
$227.09
6 +
$220.17
Related Products
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
The PSEN cs2.2p safety switch is fully coded ...
Description:
The PSEN cs2.2p safety switch is fully coded and the coding is unique which means it will only switch with the supplied actuator. If the actuator/switch is lost or broken, you will need to buy a new set. Series connection ...
The PSEN cs1.1p safety switch (stock no. 918-6689) ...
Description:
The PSEN cs1.1p safety switch (stock no. 918-6689) is coded and switches with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.The PSEN cs2.13p safety switch ...
Just one safety switch is sufficient for applications ...
Description:
Just one safety switch is sufficient for applications up to Cat 4 of EN954-1 - saving on wiringPossible to provide protection against defeat in accordance with VDE 060 by concealing the installationSimplified installation and adjustmentFor use in EX area Category ...