Netscout Network Cable Tester Auto Tester RJ45, LinkRunner LRAT-1000

  • RS Stock No. 135-4296
  • Mfr. Part No. LRAT-1000
  • Manufacturer Netscout
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Netscout LinkRunner AT-1000 Network Auto-Tester

LinkRunner™ AT Network Auto-Tester provides quick and complete copper and fibre optic network connectivity testing. This rugged, hand held network tester speeds troubleshooting and reporting with a complete one-button Autotest and zero-touch Link-Live cloud reporting. The Autotest performs your required set of connectivity tests in 10 seconds, enabling quick and accurate identification to solve network connectivity problems. Cloud reporting automatically uploads results to the Link-Live Cloud Service for project management and reporting.

Features and Benefits:

• Multiple user-configured Autotests • Cable length measurement, fault location and fault type
• TruePower (tm) Power over Ethernet (PoE) measurement
• Ethernet speed and duplex verification at 10/100 Gbit rates
• Twisted pair and fibre optic link testing
• DHCP, DNS and Gateway connectivity tests
• Ping and TCP port connectivity tests to up to 10 user-selected targets
• Results saved on the tester or uploaded to the Link-Live Cloud Service with zero-touch
• Results, project and staff management using the Link-Live Cloud Service
• Packet reflection at rates up to 1 Gbps

Frequently asked questions:

What is a LAN cable tester?

LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable.

How do network cable testers work?

Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems.

What is the difference between RJ45 & RJ11?

RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ’registered jack’.

Supplied with

LinkRunner AT 1000 tester with 4 AA batteries, LinkRunner AT Manager software CD, USB cable, Getting Started Guide and soft case

Netscout

Specifications
Attribute Value
Equipment Type Auto Tester
Connector Type RJ45
Tone Yes
Power Source Battery
Battery Type Li-ion
Battery Life 6 h
Dimensions 89 x 198 x 48mm
Weight 500g
Display Type LCD
Height 48mm
Length 198mm
Maximum Operating Temperature +45°C
Minimum Operating Temperature 0°C
Model Number p LinkRunner LRAT-1000
Width 89mm
14 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 2,265.24
(exc. GST)
$ 2,491.76
(inc. GST)
units
Per unit
1 +
$2,265.24
Related Products
Wide frequency responseNautilus casing-high impact resistance, waterproof and ...
Description:
Wide frequency responseNautilus casing-high impact resistance, waterproof and proof tested to IP67 Micro processor controlledKey press timing, Confirmation tonesBattery low warning and auto shut-offHeadset connection, Sealed electronicsSealed battery (PP3 9V not included)Large speakerWrist wrap, One button ...
Combining the new Model PE620 loop verifier with ...
Description:
Combining the new Model PE620 loop verifier with the Model 200EP inductive amplifier, Tempo presents this convenient kit. Latching feature to easily identify intermittent failures and confirm operation switches at remote locations. A convenient black magnetic plate allows this device ...
Featuring a master and remote unit able to ...
Description:
Featuring a master and remote unit able to test lengths of up to 300 meters, this LAN cable tester is compact and an ideal portable handheld tester.Designed for testing open shorted, crossed, reversed, transpose, split and non-pair wiring, it also ...
The Fluke MicroScanner2 streamlines voice/data/video cable and service ...
Description:
The Fluke MicroScanner2 streamlines voice/data/video cable and service testing. Its Revolutionary user interface makes testing fast, easy, and crystal clear. Various features including available services (10/100/1000 Ethernet, POTS, PoE voltage), cable length, wiremap, cable ID, and distance to fault are ...