Chauvin Arnoux Multimeter Current Clamp Adapter

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Chauvin Arnoux MiniFlex® Current Sensor MA110 Series

These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary sector. Their quick and easy opening/closing system makes them simple to handle even when wearing safety gloves.

MiniFlex® MA110 sensors are equipped with an automatic standby function which can be deactivated at start-up for long-term measuring campaigns. They can now be powered in 2 ways: either by batteries or by an external power supply (standard μUSB socket). On the control unit, the 3 LEDs (green, yellow and red) indicate, the battery status, the status of the automatic standby function and any measurement capacity overshoots. The single phase versions offer 4 measurement calibres, while the 3 phase versions offer 3. Comprising 3 flexible sensors which can be connected directly to any multimeter, wattmeter or logger. These flexible coils offer the following major advantages:
• Current measurement even in places where access is difficult
• Large measurement range
• Bandwidth suitable for industrial frequencies and harmonic analysis
• No saturation effect, so no overheating
• Constant low phase shift appropriate for wattmetric measurements

Features and Benefits

• Flexible single phase current sensors • Measurements from 80 mA to 3 kA
• MA110 sensors are fitted with Ø 4 mm female banana plugs
• 4 calibres
• Sensor length (clamping Ø): 17 cm, 25 cm or 35 cm (Ø4.5 cm, Ø7 cm, Ø10 cm)
• Ingress protection of sensor/processing unit: IP67 / IP54
• Output signal: AC voltage
• Output via two-wire lead terminated by 2 x Ø 4 mm straight male banana safety connectors
• Power supply: 2 x 1.5 V AA batteries or external μUSB type B 5 V
• Battery life: 300 hours
• 600 V CAT IV

Supplied with

1 flexible current sensor, 2 x 1.5 V AA / LR6 alkaline batteries, 1 user manual in 5 languages, 1 safety datasheet and 1 verification certificate

Attribute Value
Adapter Type AC
Best Accuracy 1 %
Maximum Conductor Size 45mm
Safety Category CAT III 600 V, CAT IV 600 V
Output Type Voltage
Connector Type 4 mm Plug
Battery Type Alakine, LR6, 1.5 V AA
Battery Life 300 h
Cable Length Extended 170mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature +10°C
Model Number p MA110-170
Safety Category Voltage 600V
Safety Category Level CAT III, CAT IV
1 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 522.72
(exc. GST)
$ 574.99
(inc. GST)
Per unit
1 +
Related Products
FLIR TA72 Flex Current Probe FLIR TA72 Universal ...
FLIR TA72 Flex Current Probe FLIR TA72 Universal Flex Current Probe features a 10inch long narrow flexible coil clamp and locking mechanism which lets you easily take measurements in tight or awkward spots. The TA72 can measure up to 3000A ...
The true RMS flexible clamp meter from RS ...
The true RMS flexible clamp meter from RS PRO is a highly reliable device ideal for measuring electrical parameters such as load current, voltage, resistance and more The true RMS feature allows for accurate readings of noisy, distorted or non-sinusoidal ...
Fluke Current Probes Rugged current clamp adaptor suitable ...
Fluke Current Probes Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of dc. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm ...
K1 and K2 low-current probes Current probes to ...
K1 and K2 low-current probes Current probes to measure low DC and AC currentsEasily adapted to all 19 mm standard spacing multimeters.Zero reset using a thumb wheel with disable feature.2 LEDs display overload (red LED) and the correct battery level ...