Eaton Paralleling Link for use with DILM15 Series, DILM32 Series

  • RS Stock No. 493-0725
  • Mfr. Part No. DILM32-XP1
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Paralleling Links

Used to convert a 3 pole contactor to a single pole contactor, thereby increasing the current capacity threefold, e.g. 3 pole 9A contactor becomes a single pole 27A contactor
493-0719 for use with contactor DILM7 to DILM12
493-0725 for use with contactor DILM17 to DILM32

Specifications
Attribute Value
Accessory Type Paralleling Link
For Use With DILM15 Series, DILM32 Series
Series DILM
3 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 28.08
(exc. GST)
$ 30.89
(inc. GST)
units
Per unit
1 - 4
$28.08
5 +
$26.94
Related Products
K45, Input Module Safe detection of mechanical and ...
Description:
K45, Input Module Safe detection of mechanical and sensitive protective equipment on an ASi network Accepts two category 2 safety devices according to EN 954-1 or one category 4 device to EN954-1. If Category 4 is required, a two-channel input ...
Type B & C MCBs Professional range of ...
Description:
Type B & C MCBs Professional range of Eaton Memshield miniature circuit breakers The MCBs are designed to deliver safe, reliable and high performance protection on electrical power distribution systems. Complies with BS EN 60898Accept cable up to 25mm²Thermal/magnetic operation ...
Highly conductive auxiliary contacts with four contact points ...
Description:
Highly conductive auxiliary contacts with four contact points Quick connect - snap on accessory mounting Distinct contact status indication Up to four auxiliary contacts can be mounted Mechanical interlock only 5mm deep Positive (force) guided contacts (mechanically-linked per IEC)three-pole contactors, ...
Prodis connection busbars The connection busbars ensure correct ...
Description:
Prodis connection busbars The connection busbars ensure correct installation of all "Prodis compatible" systems; DT 40 (1P+N and 3P+N), TL, CT, ITG 40, CM, etcThe busbars can be cut using a saw. Standards EN 60947-7 and EN 60439-1 Approvals NF ...