STMicroelectronics L298P, Brushed Dual Full Bridge Motor Driver, 46 V 4A 20-Pin, PowerSO

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

L298 Dual Bridge Motor Driver

The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected and the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.

Features

Operating supply voltage up to 46 V
Total DC current of up to 4 A
Low saturation voltage
Over-temperature protection
Logical "0" input voltage up to 1.5 V (high noise immunity)

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Motor Type Brushed DC
Output Configuration Dual Full Bridge
Maximum IGBT Collector Current 4A
Maximum Collector Emitter Voltage 46 V
Mounting Type Surface Mount
Package Type PowerSO
Maximum Operating Supply Voltage 46 V
Pin Count 20
Minimum Operating Supply Voltage 4.8 V
Inverter Power Rating 25W
Height 3.6mm
Maximum Operating Temperature +130 °C
Minimum Operating Temperature -25 °C
Dimensions 16 x 11.1 x 3.6mm
Length 16mm
Width 11.1mm
62 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Tube of 31)
$ 7.402
(exc. GST)
$ 8.142
(inc. GST)
units
Per unit
Per Tube*
31 - 31
$7.402
$229.462
62 - 93
$6.912
$214.272
124 - 279
$6.422
$199.082
310 - 589
$6.096
$188.976
620 +
$5.472
$169.632
*price indicative
Related Products
The range of power drivers by STMicroelectronics are ...
Description:
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. ...
The A5995 is designed to operate at voltages ...
Description:
The A5995 is designed to operate at voltages up to 40 V while driving two DC motors at currents up to 3.2 A. The A5995 includes a fixed off-time pulse-width modulation (PWM) regulator for current control. The DC motors are ...
BD62222HFP is full bridge driver for brush motor ...
Description:
BD62222HFP is full bridge driver for brush motor applications. This IC can operate at a wide range of power-supply voltages (from 6V to 27V), supporting output currents of up to 2.5A. MOS transistors in the output stage allow for PWM ...
STMicroelectronics has extended its offering of IGBT intelligent ...
Description:
STMicroelectronics has extended its offering of IGBT intelligent power modules with the introduction of the second series of SLLIMM intelligent power modules. Thanks to the optimal trade-off between conduction and switching energy, combined with outstanding robustness and EMI behaviour, they ...