STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

L298 Dual Bridge Motor Driver

The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected and the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.

Features

Operating supply voltage up to 46 V
Total DC current of up to 4 A
Low saturation voltage
Over-temperature protection
Logical "0" input voltage up to 1.5 V (high noise immunity)

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Motor Type Brushed DC
Output Configuration Dual Full Bridge
Maximum IGBT Collector Current 4A
Maximum Collector Emitter Voltage 46 V
Mounting Type Surface Mount
Package Type PowerSO
Pin Count 20
Maximum Operating Supply Voltage 46 V
Minimum Operating Supply Voltage 4.8 V
Typical Switching Frequency 25kHz
Length 16mm
Minimum Operating Temperature -25 °C
Width 11.1mm
Dimensions 16 x 11.1 x 3.3mm
Maximum Operating Temperature +130 °C
Height 3.3mm
45 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 5)
$ 6.998
(exc. GST)
$ 7.698
(inc. GST)
units
Per unit
Per Pack*
5 - 20
$6.998
$34.99
25 - 95
$5.952
$29.76
100 - 245
$5.32
$26.60
250 - 495
$5.142
$25.71
500 +
$4.982
$24.91
*price indicative
Packaging Options:
Related Products
The A5995 is designed to operate at voltages ...
Description:
The A5995 is designed to operate at voltages up to 40 V while driving two DC motors at currents up to 3.2 A. The A5995 includes a fixed off-time pulse-width modulation (PWM) regulator for current control. The DC motors are ...
Designed for pulse-width-modulated (PWM) control of DC motors, ...
Description:
Designed for pulse-width-modulated (PWM) control of DC motors, the A5950 is capable of peak output currents up to ±3 A and operating voltages from 5.5V to 40 V. DC motors are controlled using standard PHASE and ENABLE signals to permit ...
Accurate position controlHigh efficiencyLow-Power consumptionApplications in automotive, vending ...
Description:
Accurate position controlHigh efficiencyLow-Power consumptionApplications in automotive, vending machines, ATM machines, paper feed in printers, scanners, security cameras.
STMicroelectronics has extended its offering of IGBT intelligent ...
Description:
STMicroelectronics has extended its offering of IGBT intelligent power modules with the introduction of the second series of SLLIMM intelligent power modules. Thanks to the optimal trade-off between conduction and switching energy, combined with outstanding robustness and EMI behaviour, they ...