Quad D-MOS Switch DC Motor Driver DSO28

  • RS Stock No. 826-8263
  • Mfr. Part No. BTM7740GXUMA1
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Motor Driver ICs, Infineon

Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineon’s single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.

Trilith ICs include overcurrent and over-temperature protection for the high-side switches
All Servo Drivers offer over temperature and over current protection as well as over and under voltage lockout except the TLE4205G (462-7823)

Motor Controllers & Drivers, Infineon

Specifications
Attribute Value
Motor Type BLDC
Output Configuration Full Bridge
Maximum IGBT Collector Current 8A
Maximum Collector Emitter Voltage 40 V
Mounting Type Surface Mount
Package Type DSO
Pin Count 28
Maximum Operating Supply Voltage 42 V
Minimum Operating Supply Voltage 1.8 V
Typical Switching Frequency 1kHz
Maximum Operating Temperature +150 °C
Height 2.45mm
Width 7.6mm
Minimum Operating Temperature -40 °C
Automotive Standard AEC-Q100
Dimensions 18.1 x 7.6 x 2.45mm
Length 18.1mm
90 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Pack of 2)
$ 6.55
(exc. GST)
$ 7.21
(inc. GST)
units
Per unit
Per Pack*
2 - 8
$6.55
$13.10
10 - 38
$5.895
$11.79
40 - 98
$5.64
$11.28
100 - 198
$5.11
$10.22
200 +
$4.72
$9.44
*price indicative
Packaging Options:
Related Products
The Control Integrated Power System (CIPOS) are families ...
Description:
The Control Integrated Power System (CIPOS) are families of highly integrated, compact power modules They are designed to drive motors in home appliances, fan and pump applications. These energy-efficient Intelligent Power Modules (IPM) deliver increased power density with enhanced system ...
Designed for pulse-width-modulated (PWM) control of DC motors, ...
Description:
Designed for pulse-width-modulated (PWM) control of DC motors, the A5950 is capable of peak output currents up to ±3 A and operating voltages from 55V to 40 V. DC motors are controlled using standard PHASE and ENABLE signals to permit ...
The A5936 is a three phase sensorless BLDC ...
Description:
The A5936 is a three phase sensorless BLDC fan driver IC that incorporates sinusoidal drive to minimize audible noise and vibration Automatic phase advance Easy to select start-up parameters with resistor divider Low power sleep mode Supply compensation Forward and ...
Description:
The STSPIN240 is a dual brush DC motor driver integrating a low RDS(ON) power stage in a small QFN 3 x 3 mm packageBoth the full-bridges implement an independent PWM current controller with fixed OFF time.The device is designed to ...