STMicroelectronics L298N, Brushed Motor Driver IC, 46 V 4A 15-Pin, MULTIWATT V

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

L298 Dual Bridge Motor Driver

The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected and the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.

Features

Operating supply voltage up to 46 V
Total DC current of up to 4 A
Low saturation voltage
Over-temperature protection
Logical "0" input voltage up to 1.5 V (high noise immunity)

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Motor Type Brushed DC
Output Configuration Dual Full Bridge
Maximum IGBT Collector Current 4A
Maximum Collector Emitter Voltage 46 V
Mounting Type Through Hole
Package Type MULTIWATT V
Pin Count 15
Maximum Operating Supply Voltage 46 V
Minimum Operating Supply Voltage 4.8 V
Width 5mm
Length 19.6mm
Maximum Operating Temperature +130 °C
Height 10.7mm
Dimensions 19.6 x 5 x 10.7mm
Minimum Operating Temperature -25 °C
250 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Tube of 25)
$ 5.748
(exc. GST)
$ 6.323
(inc. GST)
units
Per unit
Per Tube*
25 - 25
$5.748
$143.70
50 - 100
$5.526
$138.15
125 - 225
$5.329
$133.225
250 - 475
$5.152
$128.80
500 +
$4.991
$124.775
*price indicative
Related Products
From Microchip the MTD6508 device is a 3-phase ...
Description:
From Microchip the MTD6508 device is a 3-phase full-wave sensorless driver for brushless DC (BLDC) motors that features a 180° sinusoidal drive, high torque output and silent drive The MTD6508 is designed to cover a wide range of motor characteristics ...
The A5995 is designed to operate at voltages ...
Description:
The A5995 is designed to operate at voltages up to 40 V while driving two DC motors at currents up to 32 A. The A5995 includes a fixed off-time pulse-width modulation (PWM) regulator for current control. The DC motors are ...
Allegro ICs for half- and full-bridge drives (brush ...
Description:
Allegro ICs for half- and full-bridge drives (brush motor, dc motor driver, dc brushed motor, brush dc motor)Brush DC motors are the most widely used drivers due to their low cost and simple drive control options Typical brush DC motors ...
STMicroelectronics has extended its offering of IGBT intelligent ...
Description:
STMicroelectronics has extended its offering of IGBT intelligent power modules with the introduction of the second series of SLLIMM intelligent power modules Thanks to the optimal trade-off between conduction and switching energy, combined with outstanding robustness and EMI behaviour, they ...