ROHM BD60203EFV-E2 Motor Driver IC 24-Pin, HTSSOP
- RS Stock No. 185-0203
- Mfr. Part No. BD60203EFV-E2
- Manufacturer ROHM
BD60203EFV is 2ch H-bridge motor driver for DC brush motor. This driver can facilitate low power consumption by PWM constant current control. Various protection circuits are built in. And also a circuit for lock detection is built in, so it is possible to output an error detection signal corresponding to Wired-Or signalling motor lock status. It contributes to high reliability of the set.
Single Power Supply Input (rated voltage of 36 V)
Rated Output Current (peak): 1.7 A(3.0 A)
Low ON-Resistance DMOS Output
PH, EN Input
Power Save Function
PWM Constant Current Control (current limit function)
Built-in Spike Noise Cancel Function (external noise filter is unnecessary)
Driver for 2 DC Brush Motor
Built-in Logic Input Pull-down Resistor
Cross-conduction Prevention Circuit
Thermal Shutdown Circuit (TSD)
Over-current Protection Circuit (OCP)
Under Voltage Lockout Circuit (UVLO)
Over Voltage Lockout Circuit (OVLO)
Built-in Comparator for Lock Detection
Ghost Supply Prevention (protects against malfunction when power supply is disconnected)
Microminiature, Ultra-thin and High Heat-radiation (exposed metal type) HTSSOP-B24 Package
| Attribute | Value |
|---|---|
| Configuration | H Bridge |
| Output Configuration | DMOS |
| Maximum Output Current | 1.7 (Continuous) A, 3 (Peak) A |
| Maximum Supply Voltage | 36 V |
| Mounting Type | Surface Mount |
| Package Type | HTSSOP |
| Pin Count | 24 |
| Maximum Operating Supply Voltage | 28 V |
| Minimum Operating Supply Voltage | 8 V |
| Width | 5.6mm |
| Height | 0.85mm |
| Product Length | 7.8mm |
| Length | 7.8mm |
| Maximum Operating Temperature | +85 °C |
| Product Width | 5.6mm |
| Dimensions | 7.8 x 5.6 x 0.85mm |
| Product Height | 0.85mm |
| Minimum Operating Temperature | -25 °C |
