Vishay VO3120 Motor Driver IC 8-Pin, DIP

  • RS Stock No. 180-7058
  • Mfr. Part No. VO3120
  • Manufacturer Vishay
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

The VO3120 consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides he drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving IGBTs with ratings up to 800 V/50 A. For IGBTs with higher ratings, the VO3120 can be used to drive a discrete power stage which drives the GBT gate.

2.5 A minimum peak output current
25 kV/μs minimum common mode rejection (CMR) at VCM = 1500 V
ICC = 2.5 mA maximum supply current
Isolated IGBT/MOSFET gate driver
AC and brushless DC motor drives
Induction stove top

Attribute Value
Configuration Dual
Maximum Output Current 2.5A
Maximum Supply Voltage 32 V
Mounting Type Through Hole
Package Type DIP
Pin Count 8
Maximum Operating Supply Voltage 32 V
Minimum Operating Supply Voltage 15 V
Typical Switching Frequency 1MHz
Maximum Isolation Rating 5300Vrms
Height 3.55mm
Length 9.77mm
Minimum Operating Temperature -40 °C
Product Height 3.55mm
Width 6.64mm
Product Length 9.77mm
Maximum Operating Temperature +110 °C
Dimensions 9.77 x 6.64 x 3.55mm
Product Width 6.64mm
1750 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Tube of 50)
$ 2.62
(exc. GST)
$ 2.88
(inc. GST)
Per unit
Per Tube*
50 - 50
100 - 450
500 - 950
1000 +
*price indicative
Related Products
Intelligent Power Modules (IPM) in Compact DIP Package ...
Intelligent Power Modules (IPM) in Compact DIP Package for 3-Phase Motor Drive The Intelligent Power Module (IPM) is a fully integrated three phase inverter power stage It is best suited for driving permanent magnet synchronous motors (PMSM), brushless-DC (BLDC) motors ...
The ROHM 10-pin motor driver is a full ...
The ROHM 10-pin motor driver is a full bridge, HSIP package up to 22A output current IC. The output modes are of four types: normal, reverse, stop (idling) and braking per input logic (2 inputs). The output voltage can be ...
The reversible motor driver for output 10A for ...
The reversible motor driver for output 10A for 1 motor can set the output modes to four modes, normal, reverse, stop(idling), and braking in accordance with logic input (2 inputs). Built-in surge absorption diode By built-in power save circuit, current ...
The BD65491FV motor driver provides 1 Full-ON Drive ...
The BD65491FV motor driver provides 1 Full-ON Drive H-bridge channel, while BD65492MUV provides 2 Full-ON Drive H-bridge channels These ICs feature wide range operating from 1.8V and low power consumption by high switching speed in a compact surface mount package. ...