Infineon TLE6209RAUMA2, BLDC DC Motor Driver, 40 V 6A 20-Pin, DSO-20-37

  • RS Stock No. 178-7434
  • Mfr. Part No. TLE6209RAUMA2
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Motor Driver ICs, Infineon

Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineon’s single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.

Trilith ICs include overcurrent and over-temperature protection for the high-side switches
All Servo Drivers offer over temperature and over current protection as well as over and under voltage lockout except the TLE4205G (462-7823)

Motor Controllers & Drivers, Infineon

Specifications
Attribute Value
Motor Type BLDC
Output Configuration Full Bridge
Maximum IGBT Collector Current 6A
Maximum Collector Emitter Voltage 40 V
Mounting Type Surface Mount
Package Type DSO-20-37
Maximum Operating Supply Voltage 40 V
Pin Count 20
Typical Switching Frequency 2MHz
Minimum Operating Temperature -40 °C
Width 11mm
Maximum Operating Temperature +150 °C
Length 15.9mm
Dimensions 15.9 x 11 x 3.5mm
Height 3.5mm
800 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (On a Reel of 800)
$ 5.783
(exc. GST)
$ 6.361
(inc. GST)
units
Per unit
Per Reel*
800 +
$5.783
$4,626.40
*price indicative
Related Products
A range of advanced Smart Power Modules from ...
Description:
A range of advanced Smart Power Modules from Fairchild Semiconductor which provide compact high performance solutions for many inverter motor drive applications. The modules integrate optimized gate drive for the built-in power MOSFETs to minimize EMI and losses and also ...
Designed for pulse-width-modulated (PWM) control of DC motors, ...
Description:
Designed for pulse-width-modulated (PWM) control of DC motors, the A5950 is capable of peak output currents up to ±3 A and operating voltages from 5.5V to 40 V. DC motors are controlled using standard PHASE and ENABLE signals to permit ...
Description:
The STSPIN240 is a dual brush DC motor driver integrating a low RDS(ON) power stage in a small QFN 3 x 3 mm package.Both the full-bridges implement an independent PWM current controller with fixed OFF time.The device is designed to ...
The L298 from ST is an integrated high ...
Description:
The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that ...