STMicroelectronics STSPIN32F0A, BLDC Brushless DC Motor Controller 48-Pin, VFQFPN

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The STSPIN32F0A is a System-In-Package providing an integrated solution suitable for driving three-phase BLDC motors using different driving modes. It embeds a triple half-bridge gate driver able to drive power MOSFETs with a current capability of 600 mA (sink and source). The high- and low-side switches of same half-bridge cannot be simultaneously driven high thanks to an integrated interlocking function. An internal DC/DC buck converter provides the 3.3 V voltage suitable to supply both the MCU and external components. An internal LDO linear regulator provides the supply voltage for gate drivers.

Extended operating voltage from 6.7 to 45 V
Three-phase gate drivers
600 mA sink/source
Integrated bootstrap diodes
Cross-conduction prevention

Specifications
Attribute Value
Motor Type BLDC
Output Configuration Triple Half Bridge
Configuration 3 Phase
Maximum Output Current 70mA
Maximum Supply Voltage 45 V
Mounting Type Surface Mount
Package Type VFQFPN
Maximum Operating Supply Voltage 45 V
Pin Count 48
Minimum Operating Supply Voltage -0.3 V
Typical Switching Frequency 200kHz
Series STSPIN
Height 0.95mm
Width 7.1mm
Product Length 7.1mm
Length 7.1mm
Maximum Operating Temperature +125 °C
Product Width 7.1mm
Dimensions 7.1 x 7.1 x 0.95mm
Minimum Operating Temperature -40 °C
Product Height 0.95mm
On back order for despatch 26/01/2021, delivery within 7 working days from despatch date.
Price (ex. GST) Each (In a Tray of 260)
$ 3.74
(exc. GST)
$ 4.11
(inc. GST)
units
Per unit
Per Tray*
260 +
$3.74
$972.40
*price indicative
Related Products
MC3390x System Basis Chip, NXP The MC3390x devices ...
Description:
MC3390x System Basis Chip, NXP The MC3390x devices are System Basis Chips featuring multi-output power supplies, safety supervision and a CAN transceiver for automotive-based microcontroller systems • Flexible SMPS pre-regulator allowing two topologies: non-inverting buck-boost or standard buck• Switch ...
NCV7428 System Basis Chip, ON Semiconductor The NCV7428 ...
Description:
NCV7428 System Basis Chip, ON Semiconductor The NCV7428 is a System Basis Chip integrating power supplies, undervoltage detection and a LIN bus transceiver typically for automotive Electronic Control Unit (ECU) applications This device is AEC-Q100 qualified for automotive use. • ...
BD62222HFP is full bridge driver for brush motor ...
Description:
BD62222HFP is full bridge driver for brush motor applications This IC can operate at a wide range of power-supply voltages (from 6V to 27V), supporting output currents of up to 2.5A. MOS transistors in the output stage allow for PWM ...
The device is a full bridge motor driver ...
Description:
The device is a full bridge motor driver intended for a wide range of automotive applications The device incorporates a dual monolithic high-side driver and two low-side switches. Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower®M0 ...