STMicroelectronics STSPIN32F0, BLDC Brushless DC Motor Controller 600mA 48-Pin, VFQFPN

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The STSPIN32F0 is a System-In-Package providing an integrated solution suitable for driving three-phase BLDC motors using different driving modes. It embeds a triple half-bridge gate driver able to drive power MOSFETs or IGBTs with a current capability of 600 mA (sink and source). The high- and low-side switches of same half-bridge cannot be simultaneously driven high thanks to an integrated interlocking function. An internal DC/DC buck converter provides the 3.3 V voltage suitable to supply both the MCU and external components.

Extended operating voltage from 8 to 45 V
Three-phase gate drivers
600 mA sink/source
Integrated bootstrap diodes
Cross-conduction prevention
16 general-purpose I/O ports (GPIO)
5 general-purpose timers
12-bit ADC converter (up to 9 channels)

Specifications
Attribute Value
Motor Type BLDC
Output Configuration 3 Phase
Configuration 3 Phase
Maximum Output Current 70mA
Maximum IGBT Collector Current 600mA
Maximum Supply Voltage 45 V
Mounting Type Surface Mount
Package Type VFQFPN
Maximum Operating Supply Voltage 45 V
Pin Count 48
Minimum Operating Supply Voltage 8 V
Typical Switching Frequency 200kHz
Series STSPIN
Height 0.95mm
Product Length 7.1mm
Maximum Operating Temperature +150 °C
Length 7.1mm
Dimensions 7.1 x 7.1 x 0.95mm
Product Width 7.1mm
Width 7.1mm
Minimum Operating Temperature -40 °C
Product Height 0.95mm
1472 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Pack of 2)
$ 6.36
(exc. GST)
$ 7.00
(inc. GST)
units
Per unit
Per Pack*
2 +
$6.36
$12.72
*price indicative
Packaging Options:
Related Products
The high-performance and high-density single-phase synchronous PWM step-down ...
Description:
The high-performance and high-density single-phase synchronous PWM step-down controllers are the ideal solution for computing, networking, DC-DC modules and telecommunication equipment
BD62222HFP is full bridge driver for brush motor ...
Description:
BD62222HFP is full bridge driver for brush motor applications This IC can operate at a wide range of power-supply voltages (from 6V to 27V), supporting output currents of up to 2.5A. MOS transistors in the output stage allow for PWM ...
The LB1939T is a bipolar stepping motor driver ...
Description:
The LB1939T is a bipolar stepping motor driver that features low voltage operation, a low saturation voltage and low power consumption It operates full/half step drive. It supports constant voltage and constant current drive, can control two iris motors and ...
The device is a full bridge motor driver ...
Description:
The device is a full bridge motor driver intended for a wide range of automotive applications The device incorporates a dual monolithic high-side driver and two low-side switches. Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower®M0-7 ...