Microchip ATSAMD21BLDC24V-STK Motor Control Kit BLDC Controller Board for SAMD21 for Motor

  • RS Stock No. 144-6569
  • Mfr. Part No. ATSAMD21BLDC24V-STK
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

ATSAMD21BLDC24V-STK BLDC Motor Control Kit

The ATSAMD21BLDC24V-STK is a low-voltage BLDC/PMSM motor control starter kit. The kit consists of a high-current driver board with sensing circuits and a plug-in ATSAMD21 microcontroller board.

ATBLDC24V Driver Board

• 6 x NTMFS5C646NL power MOSFETs configured as 3 x half-bridge drivers • 3 x NCP5106A High-Side/Low-Side MOSFET gate drivers
• On-board AT25DF0181A 8Mb SPI Flash memory
• On-board AT30TSE758 I²C temperature sensor
• On-board UID Identification Chip
• Phase-current sensing for Field-Oriented Control (FOC)
• Support for Sensorless Back-EMF operation
• Support for Hall and Encoder sensor-based operation
• Over-voltage and over-current protection circuit
• 3 x LED Fault indicators
• Selectable MCU supply voltage
• 67-pin NGFF socket for MCU board
• Xplained PRO extension interface
• USB micro-B socket for connection to Main MCU
• USB micro-B socket for connection to EDBG MCU
• Screw connectors for +24V supply input
• Screw connectors for motor windings
• Screw connectors for encoder inputs
• Screw connectors for Hall sensor inputs

ATSAMD21MOTOR Microcontroller Board

• 48MHz ATSAMD21J18A Cortex-M0+ MCU with 256KB Flash memory, 32KB SRAM • On-board debug (EDBG) circuit based on ATSAMD21J18A Cortex-M0+ MCU
• 10-pin Cortex DBG header
• Power and Status LEDs
• Reset switch
• Supported by the Atmel Studio integrated development platform

Supplied with

LDO BLDC motor (LDO: 42BL02402-0026B-002), Fully assembled chassis plate, 24Vdc @ 4A mains PSU (EDAC: EA11011E-240), USB cable.

Motor Controllers & Drivers, Microchip

Specifications
Attribute Value
Kit Name Motor Control Kit
Kit Classification Controller Board
For Use With Motor
Motor Type BLDC
Featured Device SAMD21
1 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 1,158.75
(exc. GST)
$ 1,274.63
(inc. GST)
units
Per unit
1 +
$1,158.75
Related Products
The Ethernet PICtail™ Daughter Board provides a cost-effective ...
Description:
The Ethernet PICtail™ Daughter Board provides a cost-effective method of evaluating and developing Ethernet control applications The board is designed for flexibility and can be plugged into a wide selection of Microchip’s standard PICDEM™ demonstration boards, including PICDEM HPC Explorer ...
x Chips are a rapid electronics development ecosystem ...
Description:
x Chips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on ...
This platform drives a 3-phase Permanent Magnet Synchronous ...
Description:
This platform drives a 3-phase Permanent Magnet Synchronous Motor (BLDC motor) by using an advanced sensor-less Field Oriented Control algorithm The phase current measurement is done via three shunts which offer a very low-cost solution avoiding expensive current sensors. The ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in Mikro Elektronika microcontroller development boards STEPPER click features a microstepping stepper motor driver with a built-in translator. A3967SLBT stepper motor driver chip Drives bipolar step motors in full-, half-, quarter- ...