Microchip PIC32MM0256GPM064-I/MR, 32bit MIPS32 Microcontroller, PIC32MM0256GPM064, 25MHz, 256 kB Flash, 64-Pin QFN

The Microchip PIC32MM0256GPM064 32-bit flash microcontroller has USB and ECC memory up to 256KB. It operates on 2V to 3.6V voltage range. This microcontroller has 256Kbytes program memory and 32KBytes data memory.

0.65 μA Sleep current for RAM Retention Regulator mode and 5 μA for Regulator Standby mode
On-Chip 1.8V Voltage Regulator (VREG)
On-Chip Ultra Low-Power Retention Regulator
microAptiv™ UC 32-Bit Core with 5-Stage Pipeline
microMIPS™ Instruction Set for 35% Smaller Code and 98% Performance compared to MIPS32 Instructions
1.53 DMIPS/MHz (37 DMIPS) (Dhrystone 2.1) Performance
3.17 CoreMark®/MHz (79 CoreMark) Performance
16-Bit/32-Bit Wide Instructions with 32-Bit Wide Data Path
Two Sets of 32 Core Register Files (32-bit) to Reduce Interrupt Latency
Single-Cycle 32x16 Multiply and Two-Cycle 32x32 Multiply
64-Bit, Zero Wait State Flash with ECC to Maximize Endurance/Retention
Up to 32K SRAM Memory
Multiple Interrupt Vectors with Individually Programmable Priority
Fail-Safe Clock Monitor mode
Configurable Watchdog Timer with On-Chip, Low-Power RC Oscillator
Programmable Code Protection
Atomic Set, Clear and Invert Operation on Select Peripheral Registers
High-Current Sink/Source
Independent, Low-Power 32 kHz Timer Oscillator
Reference Clock Output (REFO)
Four Configurable Logic Cells (CLCs) with Internal Connections to Select Peripherals and PPS
Four-Channel Hardware DMA with Automatic Data Size Detection and CRC Engine
Sleep mode operation
Low-voltage boost for input
Band gap reference input feature
Windowed threshold compare feature
Brown-out Reset (BOR)