JG Speedfit MDPE Pipe Fitting 22mm, 16 bar

  • RS Stock No. 420-9425
  • Mfr. Part No. STS22
  • Manufacturer JG Speedfit
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Superseal Pipe Insert

Use the Superseal Pipe Insert when connecting Speedfit Barrier pipe to Speedfit fittings, enhancing the sealing security of the connection,

Caution

DO NOT USE FOR: Gas, fuel oil or compressed air applications

Standards

BS EN ISO 9001: BS 7291 Parts 1 & 3 Class S

Approvals

Approved to WRC, BBA, PKM, PEM

Approvals

WRC; BBA; PKM; PEM

Standards

BS EN ISO 9001; BS 7291 Parts 1 & 3 Class S

SpeedFit Tube, Conduits & Tube Inserts

Pipe Suitability - Speedfit fittings can be used with: Copper pipe to BS2871 Part 1 / BSEN 1057: 1996, Speedfit cross linked polyethylene (PEX) Barrier Pipe to BS7291. Speedfit fittings cannot be used on stainless steel pipe.,Applications - Mains fed and indirect cold water systems, vented and unvented hot water systems and vented and sealed central heating systems.,Material - Polysulfone, Acetal

Specifications
Attribute Value
Series Superseal Pipe
Compatible Pipe Size 22mm
Maximum Working Pressure 16 bar
325 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Pack of 25)
$ 0.824
(exc. GST)
$ 0.906
(inc. GST)
units
Per unit
Per Pack*
25 - 100
$0.824
$20.60
125 - 225
$0.792
$19.80
250 - 600
$0.772
$19.30
625 +
$0.753
$18.825
*price indicative
Related Products
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points Prevent accidental removal or tampering ...
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
Speedfit manufacture a wide range of connectors including ...
Description:
Speedfit manufacture a wide range of connectors including conventional straight and bent tap connectors The tap connector only requires a simple hand tightening to connect up a terminal tap, mixer or a float valve. An integral seal within the fitting ...
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points No need to prepare threaded ...