RawlPlug Steel Masonry Anchor M6, fixing hole diameter 12mm, length 83mm

  • RS Stock No. 528-227
  • Mfr. Part No. R-RBL-06EW
  • Manufacturer RawlPlug
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Rawlbolts™ - Hook & Eye

Heavy-duty hook and eye type Rawlbolt™ anchors, suitable for a variety of applications.

Features and Benefits.

Steel hook or forged steel eye removable from cast anchor shield Bright zinc plated for corrosion protection
Typical applications include chain barriers, lighting fixtures, suspended ceilings, guy ropes and stays

Typical Shield Anchor Eye Bolt Fixings Applications.

  • Supporting ladder restraints.

  • Supporting Guy ropes, stays and cables.

Material the R-RBL-E Rawlbolt Eye Bolts are Compatible with?

Approved for use in:

  • Cracked concrete C20/25-C50/60.

  • Non-Cracked concrete C20/25-C50/60.

  • Unreinforced concrete.

  • Reinforced concrete.

  • Solid clay brick ≥ 20MPa.

  • Hollow lightweight concrete block LAC 5 ≥ 5MPa.

  • Hollow sand lime brick ≥ 15MPa.

  • Hollow core slab C20/25.

  • Hollow core slab C30/37-C50/60.

R-RBL-E Rawlbolt Expansion Eye and Hook Bolts Fixings Available?

  • Stock number 528227, M6, Shield anchor Eye Bolt, 12 mm x 83 mm.

  • Stock number 528205, M6, Shield anchor Hook Bolt, 12 mm x 83 mm.

  • Stock number 528233, M8, Shield anchor Eye Bolt, 14 mm x 98 mm.

  • Stock number 528211, M8, Shield anchor Hook Bolt, 14 mm x 98 mm.

  • Stock number 6816738, M10, Shield anchor Eye Bolt, 16 mm x 120 mm.

  • Stock number 6816735, M10, Shield anchor Hook Bolt, 16 mm x 120 mm.

  • Stock number 6816731, M12, Shield anchor Eye Bolt, 20 mm x 145 mm.

  • Stock number 6816744, M12, Shield anchor Hook Bolt, 20 mm x 145 mm.

How to use the R-RBL-E Rawlbolt Expansion Eye Bolts?

  • Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.

  • Special note: If fixing into brickwork avoid all mortar joint areas.

  • Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blowpump).

  • Insert the anchor into the pre-drilled hole till it is flush with the surface then position the eye as required.

  • Tighten the fixing carefully, only to the recommended torque using the Hex but and not the eye.

Specifications
Attribute Value
Thread Size M6
Type Shield Anchor Eye Bolt
Length 83mm
Fixing Hole Diameter 12mm
Material Steel
Eye Inside Diameter 10mm
50 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each (In a Pack of 10)
$ 9.705
(exc. GST)
$ 10.675
(inc. GST)
units
Per unit
Per Pack*
10 +
$9.705
$97.05
*price indicative
Related Products
Sleeve Anchor Bolts - Loose All purpose expansion ...
Description:
Sleeve Anchor Bolts - Loose All purpose expansion anchor for use in medium weight applications in brickwork, blockwork and hard masonry Through fixing allows drilling through pre-positioned fixture. Manufactured from zinc-plated steel. Features and Benefits. R-RLK-P Rawlok Mechanical Expansion Anchor ...
An all steel expanding Shield Anchor Carbon Steel ...
Description:
An all steel expanding Shield Anchor Carbon Steel Bright Zinc Plated & Yellow Passivated Suitable for use in concrete, Concrete blocks, bricks and some natural stone.
A zinc plated, yellow passivated, torque controlled, sleeve ...
Description:
A zinc plated, yellow passivated, torque controlled, sleeve anchor Suitable for use in non cracked concrete, dense concrete blocks, solid bricks and some natural stone. Through Fixing Light to medium duty loads Torque controlled expansion Collapse feature to allow a ...
Rawl Plug R-RBL-H Rawlbolt™ All Purpose Shield Anchor ...
Description:
Rawl Plug R-RBL-H Rawlbolt™ All Purpose Shield Anchor Plug Hook Bolt From Rawl Plug this is the R-RBL-H Rawlbolt shield anchor Hook bolt plug, one of Rawl Plug’s most sought after all purpose expanding shield anchors. The R-RBL-H Rawlbolt is ...