RS PRO Nickel Plated Brass High Pressure Ball Valve 1/2 in BSPP 2 Way
- RS Stock No.:
- RS PRO
- COO (Country of Origin):
|1 - 5||$13.97|
|6 - 24||$13.62|
|25 - 49||$13.06|
PVC Covered Steel Tee Handle Full Port Hot Forged Brass, Female - Female Thread
RS PRO range of brass manual ball valves. Manual ball valves are used to operate shut off valves which control water flow and pressure. These quarter turn brass full bore ball valves have a t-handle and female to female threads and are suitable for high temperature hot water services in domestic, commercial and industrial applications.
Ball valves can be used for air, gases, water, steam, chemicals, petrochemical products, etc. These valves are simple to use, you move the handle by a quarter of a turn to open or close the valve.
RS PRO have a great range of brass ball valves for the control of flow which can handle various pressures and high temperatures. Available in a variety of sizes:
733-5192 - T handle ball valve 1/4 inch F-F
733-5202 - T handle ball valve 3/8 inch F-F
733-5205 - T handle ball valve 1/2 inch F-F
733-5209 - T handle ball valve 3/4 inch F-F
733-5218 - T handle ball valve 1 inch F-F
Features and Benefits:
Hot forged sand blasted, nickel plated brass body and cap
sealed with Loctite
Approved by Danish Board of European Technical Approval for Construction Products (DK), GOST-R (RU), Hygenic
(RU), ROSTEKHNADZOR (RU)
High quality brass to EN 12165 and EN 12164
Full port to DIN 3357 for maximum flow
24h 100% seal test guaranteed
Pure PTFE self-lubricating seats with flexible-lip design
Dual sealing system allows valve to be operated in either direction making installation easier,
Chrome plated brass ball for longer life
No metal-to-metal moving parts
Blowout-proof nickel plated brass stem
Two FPM O-rings at the stem for maximum safety
Handle stops on body to avoid stresses at stem
Coated tee handle (red in colour)
Handle clearly shows ball position
ISO 228 Female / Female BSPP threads
Silicone-free lubricant on all seals
Non shock cold water pressure = 40 bar for valves upto 2 inch flow diameter
-40°C +170°C temperature (non freezing)
Manual quarter turn ball valves are available in various sizes to meet a range of applications. They feature a manual hand lever and can be made from brass, stainless steel and plastic. Ball valves are popular as they are reliable and durable and still close securely over long periods making them suitable for shutoff and control applications.
Gas flow control
Liquid flow control
How does a manual ball valve work?
A ball valve is a type of shut off valve that controls the flow of liquids or gases by its rotary ball. The valve is open when the balls hole is in line with the flow and closed when the ball is rotated by a quarter turn (90 degrees) by the valve handle.
What is the difference between full bore and reduced bore ball valves?
A full-bore ball valve (also known as full port) has an oversized ball so that the hole in the ball is the same size as the pipeline resulting in lover friction loss. In other words, the bore diameter has the same internal diameter as the pipe. A reduced bore valve has a smaller bore diameter than the internal diameter of the pipework it is on.
Minimum temparature operation of -40°C is NON FREEZING! Freezing of fluid in the installation may severely damage this valve.
Ball Valves 1/4 Turn, WRC Approved, Tee Handle
Hot pressed, nickel plated brass full bore ball valves with Lever style operating handles.,Suitable for oil, air, water, saturated steam or high temperature hot water services in domestic, commercial and industrial applications.
Approved to WRC standards
Red colour-coded 'Tee' handles
Working Temperature Range (Fluid): -20 to +150°C
|Threaded Connection||1/2 in BSPP|
|Body Material||Nickel Plated Brass|
|Safe for Use With||Air, Oil, Steam, Water|
|Maximum Working Pressure||40 bar|
|Connection Size mm||12.7mm|
|Connection Size inch||1/2in|