RS PRO, M6 Pan Head, 20mm Brass Slot

  • RS Stock No. 483-1678
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

Slotted Pan Head Machine Screws, Metric Thread – Plain Brass

From RS Pro, A range of superior quality pan head machine screws with a metric thread. The fully threaded fixings have a slotted drive type for easy tightening with a flat blade screwdriver. Fixings can be mated with pre-tapped holes or through hole when used with threaded nuts. These plain brass fixings are available in an array of lengths and threaded sizes to suit almost any application.

Typical Applications

• Woodworking
• DIY and maintenance
• Door furniture and hardware
• Construction

Features and Benefits

To DIN 85
• Anti-corrosive
• Water resistant
• Self-colour plain brass finish

A machine screw is similar to a bolt but has a socket or slot in its head that allows it to be turned by a screwdriver. The shank on a machine screw is straight rather than tapered with a full thread which is uniform along the entire length. Machine screws do not tap their own thread into materials like wood screws do but are designed to be fastened into pre-tapped holes in the parts they are fastening together. Having a threaded hole creates a stronger joint and results in a higher quality product.

What is a Pan Head Screw?

Pan head machine screws, as the name suggests, have a head that looks like an inverted frying pan. The heads are flat on the top and rounded on the sides. When driven into material pan head machine screws protrude rather than sit flush. Pan head type screws are used when a flat bearing surface is needed but a countersunk screw is not required.

Features and Benefits

• Pan head type for a flat bearing surface
• Durable and hard wearing
• Resistant to corrosion
• Water resistant
• Thermally and electrically conductive
• Provides aesthetic finish
• Meets DIN 85 Standards

What are Machine Screws Used For?

These brass pan head machine screws are designed to hold separate components together in a wide range of applications such as machine parts, electronic components and other hardware. They are screwed through pre-drilled tapped holes in 2 components and can be fastened at the rear with a nut. This brass machine screw, due to its anti-corrosive properties and resistance to water is particularly suitable for exterior use. Brass also provides an attractive finish to the final product. Applications include the following:

• Furniture and woodwork
• Home and office appliances
• Exterior projects
• DIY and maintenance
• Machine parts
• Electronic components

Frequently Asked Questions

What Does M2.5, M3, M3.5, M4, M5 Mean?

These measurements are found on metric screws, The 'M' stands for Metric. The number after the 'M' is the nominal outer diameter of the screw in mm.

How Do I Cut a Machine Screw?

Damage to the machine screw threads can prevent parts from fitting together properly, therefore care has to be taken when cutting them and the correct tools used.

Cutting a small machine screw (up to standard size #10 or metric size M5 (5mm)

Use a pair of multipurpose wire strippers or electricians pliers that feature M2.5, M3, M3.5, M4, M5 threaded holes. These holes are designed for cutting bolts without damaging the thread. Open the jaws and thread the machine screw into the correct size hole to the distance required. Squeeze the tool handles closed and the screw will be cut at the point where the two halves of the jaws come together. You will have a clean cut without any thread damage.

Cutting a large machine screw (larger than size #10 or metric size M5 (5mm)

This is best done using a hacksaw. Thread the nut on the screw until it reaches the desired point on the head side of the cutting line. Place the screw in a vice or clamp to keep it secure when cutting and cut the screw as straight as you can. When you unthread the nut it will repair and realign any threads that may have been damaged by the saw blade.

Attribute Value
Head Shape Pan
Drive Type Slot
Length Metric 20mm
Thread Size Metric M6
Material Brass
Thread Pitch 1mm
11 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) 1 Bag of 100
$ 91.57
(exc. GST)
$ 100.73
(inc. GST)
Per Bag
Per unit*
1 - 4
5 - 9
10 - 39
40 +
*price indicative
Related Products
WA-SCRW Pan Head Screw w cross slot M3. ...
WA-SCRW Pan Head Screw w cross slot M3.
Metric Thread - Nickel Plated Brass Machine screws ...
Metric Thread - Nickel Plated Brass Machine screws are fully threaded screws that are specifically designed to be used in pre-tapped holes or used with conforming nuts and washers in through holes Machine screws are available in an array of ...
Plain Flat Washer RS Pro pan head sems ...
Plain Flat Washer RS Pro pan head sems screw made of steel with bright zinc plating for corrosion resistance This sems screw consists of a pan headed pozidriv screw with integral captive washer for easy and quick installation. Features and ...
Single Coil Spring Washer Sems units consisting of ...
Single Coil Spring Washer Sems units consisting of pan headed Pozidriv™ machine screws together with integral captive washers Features and Benefits Bright zinc finish Easier and quicker to install than separate screws and washers Applications Not surprisingly, thanks to high-quality ...