ABB 2TLA020070R5800 USB Cable, For Use With Pluto Safety Controller

  • RS Stock No. 733-4833
  • Mfr. Part No. 2TLA020070R5800
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Pluto Safety PLC, Base Unit

Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus (733-4836), CanOpen (733-4830), Devicenet (733-4849) and Ethernet (733-4842). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation.

Simple and easy programming facilities
Easy to configure and install
Up to 640 I/O's
Multiple Plutos can be connected on a bus (via using the IDFIX identifier) and then further interfaced with external networks by using a Gateway, typical example RS stock number (733-4842)
High safety level
Free software available
Programming over the bus
35 mm DIN rail mounting
The IDFIX (733-4824) is an identification circuit which allows multiple Plutos to be identified when connected on a bus system. This module is available to distribute a PLC program within a network of Pluto devices.
Tina adapters such as (733-2477) can be used to connect external safety monitoring equipment

Note

The IDFIX device (733-4824) is connected between the input terminals ID and 0V (also note that the IDFIX device is not required when using a single Pluto, however the absense of an IDFIX requires to be stated when programming the Pluto device.)

Approvals

TUV, FS, CSA

Specifications
Attribute Value
Accessory Type USB Cable
For Use With Pluto Safety Controller
4 : Next working day (AU stock)
26 : 5 working days (Global stock)
Price (ex. GST) Each
$ 115.41
(exc. GST)
$ 126.95
(inc. GST)
units
Per unit
1 +
$115.41
Related Products
Large wiring cavity and 3 cable entriesNo additional ...
Description:
Large wiring cavity and 3 cable entriesNo additional earthing requirementsHead offers 4 actuation entriesIP67 rating3 x M20 cable entriesDimensions: H90mm x W52mm x D30mmPotential applications include bailing/pumping, semiconductor manufacturing, packaging, woodworking, metal converting and printing/paper machinery.
Telemecanique safety light curtains from the XUSL Series. ...
Description:
Telemecanique safety light curtains from the XUSL Series. Typical applications would include robotic systems, assembly and packaging lines, welding equipment and machine tools. All models are highly reliable and excellent quality. Straight or angles detectionPre-wired connectorsMetal collarIP65/67/69K rated.
Two switches in one enclosureProblem free opening of ...
Description:
Two switches in one enclosureProblem free opening of stressed doors by means of bell-crank systemRobust designLong life - up to 1 million mechanical operationsHigh holding force of 3500 NAdjustable ball latch to 400 N2 cable entries M20 x 1.5.
The JSHD series from ABB Jokab offers the ...
Description:
The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series ...