ABB 2TLA020054R0300 Connection Block, For Use With Pluto Safety Controller

  • RS Stock No. 733-2477
  • Mfr. Part No. 2TLA020054R0300
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Pluto Safety PLC, Base Unit

Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus (733-4836), CanOpen (733-4830), Devicenet (733-4849) and Ethernet (733-4842). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation.

Simple and easy programming facilities
Easy to configure and install
Up to 640 I/O's
Multiple Plutos can be connected on a bus (via using the IDFIX identifier) and then further interfaced with external networks by using a Gateway, typical example RS stock number (733-4842)
High safety level
Free software available
Programming over the bus
35 mm DIN rail mounting
The IDFIX (733-4824) is an identification circuit which allows multiple Plutos to be identified when connected on a bus system. This module is available to distribute a PLC program within a network of Pluto devices.
Tina adapters such as (733-2477) can be used to connect external safety monitoring equipment


The IDFIX device (733-4824) is connected between the input terminals ID and 0V (also note that the IDFIX device is not required when using a single Pluto, however the absense of an IDFIX requires to be stated when programming the Pluto device.)




European Machinery Directive 2006/42/EC
EN ISO 12100-1, EN ISO 12100-2,
EN 60204-1, EN 954-1, EN ISO 13849-1,
EN 62061

Attribute Value
Accessory Type Connection Block
For Use With Pluto Safety Controller
Connector Size M12 5-pin
13 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 302.09
(exc. GST)
$ 332.30
(inc. GST)
Per unit
1 +
Related Products
Schneider Preventa XUS Pre-wired Connectors Telemecanique safety light ...
Schneider Preventa XUS Pre-wired Connectors Telemecanique safety light curtains from the XUSL Series Typical applications would include robotic systems, assembly and packaging lines, welding equipment and machine tools. All models are highly reliable and excellent quality. Features & Benefits Straight ...
Schneider Electric | Preventa XY2 SB Series | ...
Schneider Electric | Preventa XY2 SB Series | Safety Switches Schneider Electric introduces the Prevent XY2 SB two-hand control safety for complete site safety The health and comfort of operators is paramount, resting handrails have been installed for ergonomic comfortability. ...
3SE5 Limit Switches, Modular Units The SIRIUS 3SE5 ...
3SE5 Limit Switches, Modular Units The SIRIUS 3SE5 limit switches provide the dependable performance required in everyday industrial applications thanks to their modular, consistent design and wide choice of variants and operating mechanismsThe standard design and function of the limit ...
0S32C Safety Laser Scanner The OS32C is a ...
0S32C Safety Laser Scanner The OS32C is a compact and versatile safety laser scanner designed for easy handling and installation The low profile and lightweight body allows installation in small spaces and the 270° detection angle provides coverage of two ...