Megger LT300-EN-BS Loop Impedance Tester 2 Wire 550V ±5% CAT IV 300 V LT300

  • RS Stock No. 528-6681
  • Mfr. Part No. LT300-EN-BS
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

LT300 Loop Tester

The LT300 combines high current-loop testing over a wide range of frequencies and supply voltages with simple operation. This is a HIGH CURRENT ONLY tester, designed for installations where there are no RCDs installed. A two-wire test performs a fast loop impedance measurement at a test current up to 27A, with a resolution of 0.01ohms. Frequency range and operating voltage are wide, allowing for a diverse range of applications up to and including CATIV 550V phase-to-phase. Testing commences automatically as soon as the instrument is connected to the supply. Repeat testing is provided by the TEST button.

High current loop tester
Simple auto start operation
16Hz to 400Hz frequency range
Up to CATIV 300V phase-to-earth (550V phase-to-phase) applications
Optional two-wire lead set available separately, RS stock no. 537-7282

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

durable hard carry case; BS1363 mains socket test lead; 8 x AA alkaline batteries; instructions.

Specifications
Attribute Value
Loop Impedance Test Type 2 Wire
Maximum Voltage Measurement 550V
Best Loop Test Accuracy ±5%
Resolution 0.1 Ω
Safety Category CAT IV 300 V
Display Type LCD
Battery Type AA
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 980g
Height 78mm
Plug Type Type G - British 3-pin
Maximum Operating Temperature +60°C
Minimum Operating Temperature -10°C
Safety Category Level CAT IV
Model Number p LT300
Width 148mm
Maximum Test Frequency 400Hz
Safety Category Voltage 300V
Length 203mm
Minimum Test Frequency 16Hz
2 In stock for delivery within 1 working day(s)
Price (ex. GST) Each
Was $1,163.00
$ 1,069.96
(exc. GST)
$ 1,176.96
(inc. GST)
units
Per unit
1 +
$1,069.96
Related Products
Offering data storage and download capabilities via a ...
Description:
Offering data storage and download capabilities via a USB port, the Fluke 1625-2 can perform 4 types of earth ground measurement This tester is able to measure ground loop resistance using only clamps, this method doesn't require the use of ...
This 1630-2 FC offers a stakeless earth ground ...
Description:
This 1630-2 FC offers a stakeless earth ground loop and ac leakage clamp, with Fluke Connect Which identifies ground loop impedance without having to disconnect the ground from the grounding system, and without having to use auxiliary test stakes. Save ...
The Fluke 1625-2 offers data storage and download ...
Description:
The Fluke 1625-2 offers data storage and download capabilities via USB port It's a distinctive earth ground tester that can perform all four types of earth ground measurement.The Earth Ground Tester is able to measure earth ground loop resistances using ...
The 3-in-1 multi-function tester, installation tester and pass/fail ...
Description:
The 3-in-1 multi-function tester, installation tester and pass/fail tester Replaces multimeter, insulation tester, RCD tester, loop impedance tester and phase sequence tester Installation verification tests to AS/NZS3017 covering earth continuity, insulation resistance, polarity, correct connections, fault loop ...