Megger LTW315-EU-BS Loop Impedance Tester 2 Wire, 3 Wire 440V ±10% CAT IV 300 V, IEC 61010 LTW315

  • RS Stock No. 198-435
  • Mfr. Part No. LTW315-EU-BS
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Megger Loop Impedance Tester

The Megger earth loop impedance testers are 2-wire, 440V and ±10% test loop accuracy. This tester is to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy but do not trip 30mA RCDs and can be used on a wide range of voltages. A loop test is performed with only 2 test leads. This can be either phase to earth, phase to neutral and phase to phase.

Supplied with
Test lead set with crocodile clips, mains socket test lead, 8 AA alkaline batteries, hard carry case and instructions.

Features and Benefits

Backlit display
0.01Ω resolution
No-trip loop test on circuits with RCDs of ≥30 mA
3-phase circuits with RCD protection can be tested
Tests radial circuits where the circuit does not return to the origin, even where only a phase and neutral contacts are available.
10second non-trip loop test time with autotest extension up to a further 10seconds
if noise is detected, to improve the accuracy of the test
High current loop testing for supplies that do not have an RCD fitted
AUTO START will start the loop test running as soon as the test leads are connected no need to press the test button means much safer testing
PFC display up to 20kA
Voltage and frequency measurement
110Vac systems including 110V centre tap to earth (55V phase to earth) can be tested on the secondary winding.
Optional 10A fused 2 wired test leads and crocodile clip set

Certifications

EN61557
EN61010-1
EN61010
IEC61010-1 300V CATIV

Specifications
Attribute Value
Loop Impedance Test Type 2 Wire, 3 Wire
Maximum Voltage Measurement 440V
Best Loop Test Accuracy ±10%
Non-Trip Loop Test Yes
Safety Category CAT IV 300 V, IEC 61010
Display Type LCD
Battery Type AA
Battery Life 2000 Tests
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 1kg
Height 78mm
Safety Category Level CAT IV
Safety Category Voltage 300V
Maximum Operating Temperature +50°C
Model Number p LTW315
Minimum Operating Temperature -10°C
Width 148mm
Length 203mm
Temporarily out of stock - back order for despatch 22/07/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 1,342.00
(exc. GST)
$ 1,476.20
(inc. GST)
units
Per unit
1 +
$1,342.00
Related Products
Fluke 1625-2 GEO Earth Ground Tester Kit Offering ...
Description:
Fluke 1625-2 GEO Earth Ground Tester Kit Offering data storage and download capabilities via a USB port, the Fluke 1625-2 can perform 4 types of earth ground measurement This tester is able to measure ground loop resistance using only clamps, ...
Fluke 1662 AU Multifunction Installation Testers Fluke 1662 ...
Description:
Fluke 1662 AU Multifunction Installation Testers Fluke 1662 part of the 1660 Series The 1662 Installation Tester puts more power in your hands by quickly and efficiently testing to all local regulations. Protecting appliances that could be inadvertently connected to ...
Fluke 1663 / FVF AU Multifunction Installation Tester ...
Description:
Fluke 1663 / FVF AU Multifunction Installation Tester Fluke 1663 part of the 1660 Series, the Installation Tester is ideal for professional users Full-featured functionality, advanced measurement capability, simple and easy to use. Operation is intuitive and easily mastered by ...
Fluke 1664 FC / FVF UA Multifunction Installation ...
Description:
Fluke 1664 FC / FVF UA Multifunction Installation Tester Fluke 1664 FC part of the 1660 Series Fluke 1664 FC contains the Insulation-Pre Test™ safety function (patent pending). This function prevents you from performing tests with appliances that are connected ...