Megger LTW325-EU-BS Loop Impedance & RCD Combined Tester, Loop Impedance Test Type 2 Wire 440V

  • RS Stock No. 198-457
  • Mfr. Part No. LTW325-EU-BS
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

LTW 300 Series

Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip 30mA RCDs and can be used on a wide range of voltages.

Backlit display
0.01Ω resolution
No-trip loop test on circuits with RCDs of ≥30 mA
3 phase circuits with RCD protection can be tested
Tests radial circuits where the circuit does not return to the origin, even where only a phase and neutral contacts are available.
10 second non trip loop test time with Auto test extension up to a further 10 seconds if noise is detected, to improve the accuracy of the test
High current loop testing for supplies that do not have an RCD fitted
AUTO START will start the loop test running as soon as the test leads are connected; no need to press the test button means much safer testing
PFC Display up to 20kA
Voltage and frequency measurement
110Vac systems including 110V centre tap to earth (55V phase to earth) can be tested on the secondary winding.
IP54 Weatherproof case
Optional 10A fused 2 wired test leads and crocodile clip set
Complies with IEC61010-1 300V CATIV safety standard and meets EN61557

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

Test lead set with crocodile clips, mains socket test lead, 8 AA alkaline batteries, hard carry case and instructions.

Specifications
Attribute Value
Loop Impedance Test Type 2 Wire
Maximum Voltage Measurement 440V
RCD Test Type AC Selective
Best Loop Test Accuracy ±10%
RCD Test Current 4A
Non-Trip Loop Test Yes
Safety Category CAT IV 300 V, IEC 61010
Display Type LCD
Battery Life 2000 Tests
Battery Type AA
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 1kg
Maximum Operating Temperature +50°C
Height 78mm
Safety Category Level CAT IV
Minimum Operating Temperature -10°C
Safety Category Voltage 300V
Length 203mm
Model Number p LTW325
Width 148mm
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each
$ 1,370.00
(exc. GST)
$ 1,507.00
(inc. GST)
units
Per unit
1 +
$1,370.00
Related Products
DET24C Earth Test Clamp DET24C is a clamp-on ...
Description:
DET24C Earth Test Clamp DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety The units are designed with flat core ends to prevent dirt build-up, ensuring measurement ...
Fluke 1650 Series Multifunction installation testers to verify ...
Description:
Fluke 1650 Series Multifunction installation testers to verify the safety of electrical installations in industrial, commercial and domestic applications Meet the requirements of IEC 60364, HD 384 and BS 7671 17th Edition wiring regulations Large illuminated display with exceptionally wide ...
MIT400 Series Digital Insulation & Continuity Testers All ...
Description:
MIT400 Series Digital Insulation & Continuity Testers All instruments meet IEC1010, HD384 and BSEN61557, and are sealed to IP54 for weatherproof performanceEasy to hold and comfortable to use, the large display provides the unique combination of two digital readouts and ...
Megger MIT480 mk2 Series Insulation & Continuity Testers ...
Description:
Megger MIT480 mk2 Series Insulation & Continuity Testers MIT480 mk2 Series insulation & continuity testers replace the original MIT480 range Designed for the Telecommunication and Cable testing markets. The tester features a redesigned case, back-stand and 6 cell battery compartment ...