INA Linear Ball Bearing Block GW20

  • RS Stock No. 172-1197
  • Mfr. Part No. GW20
  • Manufacturer INA
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Shaft support blocks are used to support shafts and locate the ends of the shaft.
They are suitable for all the solid and hollow shafts in this catalogue.
They are made from either an aluminium alloy or pressure diecast zinc.
Series GWA is identical in design to series GW but is suitable for larger fixing screws.
Depending on the series, the shaft support blocks have through holes or threaded holes.

Specifications
Attribute Value
Housing Height 50mm
Housing Length 20mm
Housing Width 60mm
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 60.18
(exc. GST)
$ 66.20
(inc. GST)
units
Per unit
1 - 4
$60.18
5 - 9
$58.36
10 +
$56.57
Related Products
Closed housing design for use with LBCR linear ...
Description:
Closed housing design for use with LBCR linear ball bearing and LPAR linear plain bearings. Integral grease nipple.
Precision housingCompact Linear Bushing StandardClosed typeTwo internal sealsLubricated ...
Description:
Precision housingCompact Linear Bushing StandardClosed typeTwo internal sealsLubricated with Dynalub 510.
For long guides requiring shaft support and a ...
Description:
For long guides requiring shaft support and a high level of rigidity. Lightweight precision housing (Aluminium)Super Linear Bushing A with self-alignment featureSecured by grooved taper pinExternal sealsRelubricatable.
The Super-Linear Bushing has a built-in inertial error ...
Description:
The Super-Linear Bushing has a built-in inertial error compensator, that compensates for the angle between the housing and shaft up to 0.5 degrees tilt without reducing the capacity due to angular pressure. Possible causes for internal errors include shaft flex ...