Steinel 1200 (W@ 120 V), 2000 (W@ 230 V) Infrared Motion Sensor Sensor, PIR, Wall Mount, 100 → 240 V

  • RS Stock No. 851-2790
  • Mfr. Part No. SensIQ S Evo BLK
  • Manufacturer Steinel
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

SensIQ S Infrared Motion Sensor Wall Mounting

The Steinel sensIQ S Infrared motion detector uses intelligent sensor technology and responds to movements and light levels, switching the light on and off automatically after a preselected time. The motion sensor has a coverage angle of 300°, the detection reach of the four pyro sensors can easily be scaled from 2 to 20m (tangentially, temperature-stabilised) in three directions using control dials, instead of shrouds of the type normally used on most other motion detectors. The sensIQ S motion detector comes with remote control and. The infrared motion sensor can be wall mounted; a corner wall mount is available to purchase separately, see accessory link. Ideal applications of the sensIQ S infrared motion detector are for outdoor and indoor use, up to a mounting height of 2.50m, ideal for building entrances, large properties and loading bays.

Infrared motion detector
Passive infrared sensor type
Suited for outdoor and indoor use
Wall mountable (corner wall mount available as accessory for easy corner mounting)
Recommended installation height 2.00-2.50m
300° detection angle
Reach Adjustable in 3 directions by control dial, (2 – 20m max.)
2 to 2000 lx brightness response
Time settings from 10 seconds to 15 minutes
IP54 rated
Protection class II

Motion Detectors

More detailed technical information is available from our web site.

Specifications
Attribute Value
Controller Type Sensor
Sensor Type PIR
Voltage Rating 100 → 240 V
Mount Type Wall
Range Adjustable m, 20 m
Power Consumption 1.2 kW @ 120 V, 2 kW @ 230 V
Time Delay 5 s → 15 min
Length 128 mm
Width 114 mm
Height 74mm
6 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 196.67
(exc. GST)
$ 216.34
(inc. GST)
units
Per unit
1 +
$196.67
Related Products
Incorporates a lampholder (1170 WHI), heat resisting PVC ...
Description:
Incorporates a lampholder (1170 WHI), heat resisting PVC insulated and sheathed flexible 0.75mm² two core circular cable complying with BS 6500: 2000 (Table 29) and a ceiling rose fitted with line, neutral, loop-in and earth terminals (1161 WHI).This assembly will ...
Highest CELMA Energy Efficiency Index A2 BATNominal life ...
Description:
Highest CELMA Energy Efficiency Index A2 BATNominal life time up to 100,000 h (at ta 50 °C with a failure rate max. 0.1 % per 1,000 h)Large temperature rangeIntelligent Voltage Guard (overvoltage indication and undervoltage shutdown)Precise lamp operation using adjustment ...
Plastic light fixture with heat shieldDimensions: lamp body ...
Description:
Plastic light fixture with heat shieldDimensions: lamp body Ø 120 ´ 110 mmArms 400 + 425 mmLamp cover made of glassProtection rating IP20, protection class IConnection voltage 230 V / 50 Hz2 m mains cableColour: whiteFitted with: halogen bulb 12 ...
These controllers automatically turn lights 'ON' and 'OFF' ...
Description:
These controllers automatically turn lights 'ON' and 'OFF' in response to changes in ambient light levels, primarily the transition from day to night and vice-versa. The more advanced types (see note below) have inbuilt logic to minimise false triggering, whereas ...