HellermannTyton Lighting Cover for use with Unrolled wool insulation and mineral plate reinforcement, 592mm Width,592mm
- RS Stock No.:
- 177-4545
- Mfr. Part No.:
- 148-00117 SPOTCLIP-PLATE 600-PA66HS-BK
- Brand:
- HellermannTyton
On back order for despatch 12/07/2024, delivery within 10 working days from despatch date.
Added
Price (ex. GST) Each
$49.88
(exc. GST)
$54.87
(inc. GST)
Units | Per unit |
1 + | $49.88 |
- RS Stock No.:
- 177-4545
- Mfr. Part No.:
- 148-00117 SPOTCLIP-PLATE 600-PA66HS-BK
- Brand:
- HellermannTyton
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- FR
Product Details
The SpotClip-Plate provides a solution to the difficulty of installing downlights in suspended ceilings: it spreads the lamp load evenly in suspended ceilings and reinforces the mineral plates.
SpotClip-Plate can be used to ensure the safety distance between the
downlight and insulation material. We offer three different solutions to
prevent damage to insulation material caused by overheating of
the bulb: either by combining it with the SpotClip-Kit, or by combining it with 4 Spotclip-Caps and 4 rigid tubes or 2 SpotClip-Plate separated by rigid tubes.
This process also improves lamp lifespan and reliability.
Installation and bulb replacement is quick and easy. This solution can be used for both refurbishment and new construction.
The SpotClip-Plate is suitable for the most common downlight diameters from 75 to 314 mm. Simply cut the pins between the pre-cut areas with a hacksaw to obtain the desired diameter and allow the spotlight to be installed in the centre of the plate.
SpotClip-Plate can be used to ensure the safety distance between the
downlight and insulation material. We offer three different solutions to
prevent damage to insulation material caused by overheating of
the bulb: either by combining it with the SpotClip-Kit, or by combining it with 4 Spotclip-Caps and 4 rigid tubes or 2 SpotClip-Plate separated by rigid tubes.
This process also improves lamp lifespan and reliability.
Installation and bulb replacement is quick and easy. This solution can be used for both refurbishment and new construction.
The SpotClip-Plate is suitable for the most common downlight diameters from 75 to 314 mm. Simply cut the pins between the pre-cut areas with a hacksaw to obtain the desired diameter and allow the spotlight to be installed in the centre of the plate.
Specifications
Attribute | Value |
---|---|
For Use With | Unrolled wool insulation and mineral plate reinforcement |
Product Width | 592mm |
Product Length | 592mm |
Series | SpotClip-Plate |