RS PRO Constant Voltage LED Driver 10W 12V 820mA

  • RS Stock No. 669-7206
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

LED Replacement for 12V Dichroic Lamps

Suitable as a direct energy saving alternative to 12V MR16 halogen dichroic lamps
Comparable light output to higher wattage halogen lamps making them suitable for general lighting, lift cars, hotels and bars as well as accent and highlighting effects
Wide beam angle (60°) for a good even spread of light
Long lamp life with very few early failures (if run on the dedicated transformer) making it suitable for difficult to reach locations
Available colour outputs: pure white (5300K) to blend in with other halogen lamps or warm white (2950K) which provides an eye-pleasing light quality similar to tungsten incandescent lamps
Very cool beam and low heat generation reduces air conditioning requirements
Attractive nickel plated diecast housing
LED driver (Stock Number 669-7206) is suitable for use within a luminaire, enclosure or free standing (within ceiling space etc.) and can drive multiple lamps (max. 10 W)

Note

It is strongly recommended that these lamps are run with the dedicated LED driver. In some instances the lamps may run correctly with existing power supplies, but it is important to ensure that the required minimum wattage is reached. Use with the dedicated LED drivers is recommended for greatest longevity, compatibility and to avoid lamp flicker or strobing.
The 5W lamps will protrude from most fittings and are therefore unsuitable for enclosed fittings. Lamp life may be reduced if installed in sealed fittings. 3 year warranty valid only when these LED lamps are operated with the dedicated LED driver.

Specifications
Attribute Value
Input Voltage 220 → 240 V ac
Output Voltage 12V
Operation Constant Voltage
Output Current 820mA
Maximum Output Power 10W
AC or DC Input Voltage Ac
Current Rating 820mA
Output DC
Voltage Rating 230 V, 230 V ac
Standards Met DIN VDE0710-T14, EN 55015, EN 61000-3-2, EN 61347-1, EN 61347-2-13, EN 61547, EN 62384
3 : Next working day (AU stock)
49 : 5 working days (Global stock)
Price (ex. GST) Each
$ 29.12
(exc. GST)
$ 32.03
(inc. GST)
units
Per unit
1 +
$29.12
Related Products
The RS PRO Range of 60watt Constant voltage ...
Description:
The RS PRO Range of 60watt Constant voltage LED Drivers are housed in a compact light weight high quality plastic enclosure with covered input & output terminals suitable for general Indoor LED applications. Input Voltage 200-240vac Class II Compact Plastic ...
The RS PRO Range of 3watt Constant current ...
Description:
The RS PRO Range of 3watt Constant current LED Drivers are housed in a compact light weight high quality plastic enclosure with covered input & output terminals suitable for general Indoor LED applications. Input Voltage 100-240vac Low Profile Compact Plastic ...
The RS PRO Range of 3-6watt Constant current ...
Description:
The RS PRO Range of 3-6watt Constant current LED Drivers are housed in a compact light weight high quality plastic enclosure with covered input & output terminals suitable for general Indoor LED applications. Input Voltage 90-264vac Low Profile Compact Plastic ...
24vdc Input CC 350mA DC-DC LED Driver Wire ...
Description:
24vdc Input CC 350mA DC-DC LED Driver Wire terminations. Suitable for 12V & 24V LEDs lighting application.Fly leads 20AWG 15cm for rapid connection.Waterproof packagingTc Point measured, Max case temperature: 70°CProtections: Short-Circuit.