Microchip Technology CL6N5-G Constant Current LED Driver, 90 V dc 120mA 3-Pin TO-220

  • RS Stock No. 177-1531
  • Mfr. Part No. CL6N5-G
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

The CL6 is a fixed, linear current regulator designed for driving high brightness LEDs at 100mA from nominal 12V, 24V, or 48V supplies. With a maximum rating of 90V, it is able to withstand transients without the need for additional transient protection circuitry. The CL6 is offered in both TO-252 (D-PAK) and TO-220 packages. The tab on the TO-220 is ground, allowing heatsinking directly to a chassis without the need for electrically insulating spacers. Overtemperature protection shuts off the LED current when the die temperature rises above 135°C (nominal). Full LED current resumes when the die temperature falls below 105°C (nominal).

Additional Features:100mA ±5% constant current driveBuilt-in reverse polarity protectionDimmable via PWM supplyOvertemperature protectionTab ground allows direct heatsinking to chassis90V max rating for transient immunity

Specifications
Attribute Value
Output Current 120mA
Input Voltage 90 V dc
AC or DC Input Voltage Dc
Dimming Operation PWM
Application Flashlights, Low Voltage Lighting, Low Voltage Signage, Specialty Lighting
Package Type TO-220
Number of Pins 3
Maximum Output Voltage 90V
Minimum Output Voltage 4V
Current Rating 50 120mA
Series CL6
300 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Tube of 50)
$ 1.697
(exc. GST)
$ 1.867
(inc. GST)
units
Per unit
Per Tube*
50 - 50
$1.697
$84.85
100 +
$1.64
$82.00
*price indicative
Related Products
BD93941FP is a high efficiency driver for white ...
Description:
BD93941FP is a high efficiency driver for white LEDs and designed for large LCDs These ICs are built-in a boost DCDC converters that employ an array of LEDs as the light source. BD93941FP has some protect function against fault conditions, ...
The HV9912 is a current mode control LED ...
Description:
The HV9912 is a current mode control LED driver IC designed to control single switch PWM converters (buck, boost, buck-boost or SEPIC) in a constant frequency mode The controller uses a peak current-mode control scheme with programmable slope compensation and ...
BD18345EFV-M is 70 V-withstanding constant current controller for ...
Description:
BD18345EFV-M is 70 V-withstanding constant current controller for automotive LED lamps It is able to drive at maximum 10 rows of PNP transistors. It can also contribute to reduction in the consumption power of the set as it has the ...
LED Drivers, Toshiba Toshiba constant current drivers are ...
Description:
LED Drivers, Toshiba Toshiba constant current drivers are designed for LEDs, and LED panel displays They Incorporate channels of shift registers, latches, AND gates and constant-current outputs. Fabricated using the Bi-CMOS process, and are capable of high-speed data transfers. Toshiba ...