BD93941FP-E2, LED Driver DC-DC, HSOP20

  • RS Stock No. 171-6900
  • Mfr. Part No. BD93941FP-E2
  • Manufacturer ROHM
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
Product Details

BD93941FP is a high efficiency driver for white LEDs and designed for large LCDs. These ICs are built-in a boost DCDC converters that employ an array of LEDs as the light source. BD93941FP has some protect function against fault conditions, such as the over-voltage protection (OVP), the over current limit protection of DCDC (OCP), the short circuit protection (SCP), the open detection of LED string. Therefore BD93941FP is available for the fail-safe design over a wide range output voltage.

4ch LED constant current driver and DC/DC converterMaximum LED Current: 200mAAnalog current (Linear) dimming at ADIM pinLED pin rating 60VIndividual detection and individual LED OFF for both open and short circuitsBuilt-in ISET pin short-circuit protection circuitSet Soft-Start time by external capacitor.FETs Gate (N pin) is driven by 5.8V swingBuilt-in Vout discharge circuit for shutdownBuilt-in Vout overvoltage protection (OVP) / reduced voltage protection (SCP) circuit

On back order for despatch 26/08/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (On a Reel of 2000)
$ 1.455
(exc. GST)
$ 1.601
(inc. GST)
units
Per unit
Per Reel*
2000 +
$1.455
$2,910.00
*price indicative
Related Products
LYTSwitch-4 series High Power LED Driver AC-DC Converters ...
Description:
LYTSwitch-4 series High Power LED Driver AC-DC Converters The Power Integrations LYTSwitch-4 family of off-line AC-DC single-stage converters are designed for high-power LED driver applications They integrate control and drive circuits and power factor correction in a single package and ...
BU2090FS incorporates a built-in shift register and a ...
Description:
BU2090FS incorporates a built-in shift register and a latch circuit to control 12 LED by serial interface, linked to a microcontrollers LED can be driven directly. (Output current 25mA)12 bit parallel output Operational on low voltage (2.7V to 5.5V)Applications:MFP(Multi Function ...
The ROHM BD9397EFV series is a high-efficiency LED ...
Description:
The ROHM BD9397EFV series is a high-efficiency LED driver for white LEDs and designed for a large LCD panel This IC is a built-in high current drive with high responsibility type 6ch LED drivers and 1ch boost DC-DC converter. It ...
The HV9912 is a current mode control LED ...
Description:
The HV9912 is a current mode control LED driver IC designed to control single switch PWM converters (buck, boost, buck-boost or SEPIC) in a constant frequency mode The controller uses a peak current-mode control scheme with programmable slope compensation and ...