Power Integrations LYT4323E LED Driver IC, 160 → 308 V ac 2.72A 6-Pin eSIP-7C

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

LYTSwitch-4 series High Power LED Driver AC-DC Converters

The Power Integrations LYTSwitch-4 family of off-line AC-DC single-stage converters are designed for high-power LED driver applications. They integrate control and drive circuits and power factor correction in a single package and are available in both dimming and non-dimming versions.

• High line voltage operation: 160-308 Vac
• Better than ±5% constant current regulation
• Up to 92% efficiency in typical applications
• High power factor >0.9
• Easily meets EN61000-3-2
• Less than 10% THD in optimized designs
• 132 kHz switching frequency permits use of small low-cost magnetics
• No primary side aluminium electrolytic bulk capacitors required
LTY432x types only:
• TRIAC dimmable to less than 5% of full output
• Fast start-up: <250 ms at full brightness, <1s at 10% brightness

AC-DC Converters, Power Integrations

Specifications
Attribute Value
Output Current 2.72A
Input Voltage 160 → 308 V ac
Dimming Operation Triac
Maximum Output Power 18W
Application High Line LED Lighting
Package Type ESIP-7C
Number of Pins 6
Minimum Output Voltage 36V
Current Rating 1.2 (Non-Switching) mA, 4 (Switching) mA
Series LYT4x23
On back order for despatch 24/04/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each (In a Pack of 5)
$ 2.406
(exc. GST)
$ 2.647
(inc. GST)
units
Per unit
Per Pack*
5 - 10
$2.406
$12.03
15 - 20
$2.164
$10.82
25 - 45
$1.942
$9.71
50 - 95
$1.90
$9.50
100 +
$1.754
$8.77
*price indicative
Packaging Options:
Related Products
The LYTSwitch-5 family of AC-DC Converters from Power ...
Description:
The LYTSwitch-5 family of AC-DC Converters from Power Integrations is ideal for single-stage power factor corrected constant current LED applications, equally suited for lamps, tubes or ballasts These highly integrated devices incorporate a discontinuous mode, variable frequency, variable on-time controller, ...
LYTSwitch-3 single-stage LED driver ICs with combined power ...
Description:
LYTSwitch-3 single-stage LED driver ICs with combined power factor correction and constant current outputs from Power Integrations These devices incorporates a high-voltage power MOSFET and discontinuous mode, variable frequency, variable on-time controller integrated into a single chip. They can provide ...
Non-isolated Drives up to ten 2W power LEDs ...
Description:
Non-isolated Drives up to ten 2W power LEDs Constant current source Output current accuracy ±2%, Output current stability ±1%Efficiency up to 96%Wide input voltage rangePWM digital and analogue voltage dimming Remote On/Off control pin0 to 4Vdc analogue dimming Short circuit ...
Description:
The LBP01 is a bypass switch to be connected in parallel with an LED In case of LED failure, this allows the current to flow through the other LEDs in the series.