Artesyn Embedded Technologies AIH 250W Isolated DC-DC Converter Through Hole, Voltage in 250 → 420 V dc, Voltage

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

Astec 250W Half Brick, High Power, Regulated, Isolated DC-DC Converter - AIH Series

Isolated single output half brick DC-DC converter module with 250W output and a maximum baseplate operating temperature of 100°C without derating. This single output half brick DC-DC converter module has full safety isolated secondary side control and I2C bus for communication.

Half-Brick, low profile package dc-dc converters, designed for use with Astec AIT & AIF PFC series power supplies
High voltage 250-420Vdc input voltage range
Regulated outputs
Adjustable output voltage by using external resistors (74 to 120% for 5V, 80 to 120% for 12V & 24V)
2.7kV input / output isolation
High efficiency up to 87%
No minimum load required
EMC meets EN 55022 Class A with a recommended filter (refer to Astec Technical Reference Note)
Low output ripple and noise
Control and monitoring functions ( Remote Enable and Current & Temperature Monitoring)
Parallelable with accurate current sharing
Remote sense
Over-voltage, over-current, over-temperature and short circuit protection

Note

MTBF to Telcordia Tech SR-332.

Standards

EN 60950, UL 60950, IEC 60950

Approvals

UL/cUL recognised, TUV

//media.rs-online.com/t_line/L0461824-01.gif

Astec - High Power - 300Vin DC/DC Converters

Specifications
Attribute Value
Output Voltage 24V dc
Input Voltage Range 250 → 420 V dc
Input Voltage Nominal 300 V dc
Power Rating 250W
Output Current 10.4A
Mounting Type Through Hole
Number of Outputs 1
Efficiency 88%
Package 1/2 Brick
Minimum Temperature -20°C
Maximum Temperature +100°C
Series AIH
Length 61mm
Depth 12.7mm
17 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 326.79
(exc. GST)
$ 359.47
(inc. GST)
units
Per unit
1 - 4
$326.79
5 - 9
$321.07
10 - 24
$312.75
25 - 49
$304.21
50 +
$296.33
Related Products
The ERM50 series high performance 50 watt isolated ...
Description:
The ERM50 series high performance 50 watt isolated DC-DC converter modules are designed specifically for railway applications The high input versions feature a 66 to 160 Vdc input for equipment used on railway rolling stock. There is a choice of ...
The ERM75 series high performance 75 watt isolated ...
Description:
The ERM75 series high performance 75 watt isolated DC-DC converter modules are designed specifically for railway applications The high input versions feature a 66 to 160 Vdc input for equipment used on railway rolling stock. There is a choice of ...
Description:
ZUS Series, 15 W → 10 W Single Output From Cosel, the ZUS series of isolated DC-DC converters are low cost, high profile and designed with an ultra thin profile. With a field failure rate of less than 0.012%, these ...
Traco 3W DIP Fully Regulated Isolated DC-DC Converter ...
Description:
Traco 3W DIP Fully Regulated Isolated DC-DC Converter - TEM 3N Series The Traco Power TEM 3N series is a range of isolated DC/DC converters in a DIP-24 packageThe offer tight output regulation and very low output noise. The TEM ...