ABB R600 Series 5V dc DIN Rail Interface Relay Module, SPDT, Screw

  • RS Stock No. 669-9974
  • Mfr. Part No. 1SNA645034R2300
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Interface Relay - R600 Series

ABB R600 series interface relays are used for electrical isolation, amplification and signal matching between a PLC, PC or field bus system and the sensor/actuator level. The compact design and different connection terminal possibilities optimise your panel installation.

Features and Benefits

Screw or spring type terminals Wide range of output options
Built in RC circuit
Leakage current protection on the input side
Available with visible or covered switch
Manual or automatic actuation
LED for the indication of the operational state

Specifications
Attribute Value
Coil Voltage 5V dc
Switching Current 6 A
Contact Configuration SPDT
Mounting Type DIN Rail
Terminal Type Screw
Length 70mm
Depth 6mm
Series R600
Height 75mm
Dimensions 70 x 6 x 75mm
Input Current 40mA
Operating Temperature Range -20 → +70°C
Turn On Time 5ms
Turn Off Time 8ms
Maximum Operating Temperature +70°C
Minimum Operating Temperature -20°C
39 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 43.02
(exc. GST)
$ 47.32
(inc. GST)
units
Per unit
1 - 5
$43.02
6 - 11
$41.74
12 +
$41.30
Related Products
Interconnect D-Subminiature into screw-clamp terminalsD-sub according to MIL-C-24308 ...
Description:
Interconnect D-Subminiature into screw-clamp terminalsD-sub according to MIL-C-24308 / DIN41652Compact 47 mm profile Rail mount on DIN-rail TS3515A current rating per pin Stripping length, screw/tension spring 6-7mm Alternative to pure individual wire approach.
VARIOFACE module for connecting a RJ45 socket with ...
Description:
VARIOFACE module for connecting a RJ45 socket with spring-cage double connection terminal blocks in direct plug-in method Spring-cage connection to the field levelRJ45 socket to the control systemDIN rail mounting.
For use where isolated output drive is required ...
Description:
For use where isolated output drive is required eg. motors, lamps, heaters, solenoids, etc. Modules provide the complete output interface function incorporating optical isolation with power drive components. ac modules use zero voltage switching for low noise operation, a dc ...
Freely programmable process controller in four formats Tried-and-tested, ...
Description:
Freely programmable process controller in four formats Tried-and-tested, clearly laid-out operating and configuration diagram Bright LCD display for viewing different process parameters Max two freely programmable analogue inputs Up to 8 binary outputs Four limit comparators Freely programmable controller ...